Sony Sat-T60 multiple devices.
Posted: Mon Nov 03, 2003 5:11 pm
The Sony Sats uses 3 possible remote devices. How do I designate this in KM & IR to differentiate between receivers?
Thanks.
Eric
Thanks.
Eric
Page 1 of 1
DecodeCCF.exe
Posted: Mon Nov 03, 2003 5:16 pm
Where can I find this program? I've seen various references to it and have been unable to locate it. Thanks. Eric
Posted: Mon Nov 03, 2003 5:55 pm
Eric,
Welcome to JP1. I thought we had posted DecodeCCF to the old JP1 files/programs but apparently it is still at:
http://groups.yahoo.com/group/jp1-km/fi ... odeCCF.zip
you will probably have to join the JP1-KM group first. You will also need to unzip and install:
http://groups.yahoo.com/group/jp1/files ... IR_DLL.zip
in the windows\system directory if you haven't done so already.
The Sony DSS codes are here:
http://www.anycities.com/rhm5757/Sony_sat.htm
"Sat1 is 183, Sat2 is 23.133, and Sat3 is 23.69"
Sat1 Sony12/15 protocol device 1 = 183
Sat2 Sony20 protocol device 1 = 23 and device 2 = 133
Sat2 Sony20 protocol device 1 = 23 and device 2 = 69
Use OBC and the commands can be copied from http://www.anycities.com/rhm5757/Sony_sat.htm
Welcome to JP1. I thought we had posted DecodeCCF to the old JP1 files/programs but apparently it is still at:
http://groups.yahoo.com/group/jp1-km/fi ... odeCCF.zip
you will probably have to join the JP1-KM group first. You will also need to unzip and install:
http://groups.yahoo.com/group/jp1/files ... IR_DLL.zip
in the windows\system directory if you haven't done so already.
The Sony DSS codes are here:
http://www.anycities.com/rhm5757/Sony_sat.htm
"Sat1 is 183, Sat2 is 23.133, and Sat3 is 23.69"
Sat1 Sony12/15 protocol device 1 = 183
Sat2 Sony20 protocol device 1 = 23 and device 2 = 133
Sat2 Sony20 protocol device 1 = 23 and device 2 = 69
Use OBC and the commands can be copied from http://www.anycities.com/rhm5757/Sony_sat.htm
Posted: Mon Nov 03, 2003 6:11 pm
Somebody should move it to JP-1. It's no wonder nobody can find it.
Jim
Jim
Posted: Mon Nov 03, 2003 6:34 pm
Jon,
Thank you very much for your links to DecodeCCF!
I uploaded the DecodeCCF.zip to JP1 files/tools section (the section that says "dont move stuff in here you damn newbie
" ) -- if my description and selection of folders are not correctly please make the necessary changes. Much Obliged!
Thank you very much for your links to DecodeCCF!
Rob,jamesgammel wrote:Somebody should move it to JP-1. It's no wonder nobody can find it.
I uploaded the DecodeCCF.zip to JP1 files/tools section (the section that says "dont move stuff in here you damn newbie
" ) -- if my description and selection of folders are not correctly please make the necessary changes. Much Obliged!Posted: Mon Nov 03, 2003 6:38 pm
Like Jon said, he expected to find it in Files>programs. That would have been a good selection.
Jim
Jim
Posted: Mon Nov 03, 2003 6:53 pm
Jon and Jim,jamesgammel wrote:Like Jon said, he expected to find it in Files>programs. That would have been a good selection.
Jim
I moved DecodeCCF.zip to Files/programs. Thanks. (Initially, somehow I missed the part of Jon's note where he said Files/programs would have been a good home.)
Thanks
Posted: Mon Nov 03, 2003 7:25 pm
Jon, (& others)
Thanks for the help. I'd found the Sony codes, but didn't know what to do with the xx.xxx devices. I'm on my way again. Also, spent quite a bit of time looking for the decodeccf file in jp1 & jp1-km from your previous notes, Jon. The file move should help us new people.
I've spent the last couple of weeks just trying all the concepts of JP1. I have some extender questions, but am now making sure I have all my IR pieces to put it all together for the remotes. Then finally back to the Ocelot/HomeSeer setup that Jon distracted me from.
You are all an amazing group of people. Thank you.
Eric
Thanks for the help. I'd found the Sony codes, but didn't know what to do with the xx.xxx devices. I'm on my way again. Also, spent quite a bit of time looking for the decodeccf file in jp1 & jp1-km from your previous notes, Jon. The file move should help us new people.
I've spent the last couple of weeks just trying all the concepts of JP1. I have some extender questions, but am now making sure I have all my IR pieces to put it all together for the remotes. Then finally back to the Ocelot/HomeSeer setup that Jon distracted me from.
You are all an amazing group of people. Thank you.
Eric
Posted: Mon Nov 03, 2003 8:25 pm
For what it's worth, I spent quite a bit of time the other day myself trying to find DecodeCCF, unfortunately I didn't have time to load it up into the Programs folder myself