Page 1 of 1
MP 101 For RobMan
Posted: Thu Jan 20, 2005 10:36 am
by baysidetech
RobMan..I have one of you Mod'd urc 6131's and I also own a netgear mp101. I downloaded your upgrade for the 101 but I keep getting a protocol error that the remote does not support the selected protocol....can you shed some light? Thanks
Posted: Thu Jan 20, 2005 10:46 am
by gfb107
Please provide more details:
Provide a link to the upgrade.
Are using RM or KM?
What is the exact text of the message, and exactly (step by step) what did you do to get it?
Are you using the extender with your 6131?
Posted: Thu Jan 20, 2005 10:52 am
by baysidetech
Upgrade Link
https://www.hifi-remote.com/forums/dload ... ile_id=996
I am using RM 1.14. I open the RM, and try and load the upgrade file and get the following message:
"Selected protocol "Manual Setting" (01 2a) is not compatible with the
selected remote. This upgrade will NOT function correctly. Please
choose a different protocol."
I do not have an extender.
Posted: Thu Jan 20, 2005 11:21 am
by gfb107
You've encountered a bug in RM's import routine. I was able to work around it. Try
Netgear MP101.rmdu
Posted: Thu Jan 20, 2005 11:43 am
by baysidetech
thanks...that worked!
Posted: Fri Jan 21, 2005 2:30 pm
by baysidetech
Will this also work if I install the extender to the 6131?
Posted: Fri Jan 21, 2005 2:39 pm
by gfb107
Yes, with a little bit of work. Because of the way the extender in the 6131 works, the format for keymoves changes when the extender is installed. This just means that you'll have to go into RM/KM and change the selected remote to the 6131 w/ extender, and then copy'n'paste the upgrades into IR again. Note that you really only have to do this if your upgrades generate keymoves.
Posted: Sat Jan 22, 2005 3:32 pm
by baysidetech
Thanks
Posted: Mon Jan 24, 2005 2:07 pm
by baysidetech
Any idea if the netgear mp101 has discrete on/off codes