JP1 Remotes

Goofy23 · Joined: 13 Jan 2005 Posts: 4

Hello
i got a URC-7562.
I've tried to programm my Remote for a VDR with Lirc .
I've tried many ways, one way was to remap the VCR with a CD Code and then remap some Keys with the 994 mode.

My problem now is , ican not remove this last settings with 994.
I've tried a 980 and 981 Reset, now nothing works anymore but I have the problem that the Yellow Key does not react anymore, no blinking when pressing??????
I think physicaly the button is correct, but what is wrong.

I want to completely Reset my Remote, is there a posibilty over JP1, like a Cmos Reset?

The Robman · Posted: Thu Jan 13, 2005 7:21 pm Post subject:

When you did the 981 reset, did you get 4 short blinks? If so, that at least means your remote is working OK. Have you tried doing a keymove onto the yellow button? If the button doesn't respond during the keymvoe processing, it might be worn out.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

Goofy23 · Joined: 13 Jan 2005 Posts: 4

Thanks for the Reply.
My English is not the best, i am German.

Yes i got 4 blinks, after 981

i tried to remap the yellow key, thats the case.

I go and get my dictionary and will see what "worn out" means.
What can i do?

I want to use or try the 0000 Vcr Code how can i be sure that every button is working with this code.
Can anyone give me the Keymagic code that i can try with my yellow cd key?
There is no CD player on it so i can programm the key to anythng.

The Robman · Posted: Thu Jan 13, 2005 10:05 pm Post subject:

"worn out" means that you have used the button too many times and it no longer works.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

uwereinert · Posted: Fri Jan 14, 2005 1:56 am Post subject:

Goofy,

you could have it a little bit easier, look at http://groups.yahoo.com/group/jp1-de/

Uwe

Goofy23 · Joined: 13 Jan 2005 Posts: 4

thanks.
but i never used the usegroups before.

the Button is not worn out, cause it was used seldon before.
The Problem came with my remapping, how to unremap?
Reset the IRC?

The Robman · Posted: Fri Jan 14, 2005 3:34 pm Post subject:

A 981 reset will remove ALL user programming.

To test that the yellow button still works, try copying a working button onto it, like this...

1) Hold SETUP (MAGIC) button, 2 flashes
2) Type 994, 2 flashes
3) Press good button
4) Press yellow button, 2 flashes

The yellow button should now perform the same function as the good button that was copied.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

Goofy23 · Joined: 13 Jan 2005 Posts: 4

he is working if i press twice the yellow cd button he respond, but not if i press once.
I forgot to mention before.
Now he works , after your instructions, thanks. but he got a faulty code now?
The code seems to remain on yellow key after reset cause i did the reset several times before, and didn't got better.

uwereinert · Posted: Sat Jan 15, 2005 11:02 am Post subject: