Oneforall 6 Urc-7562 Key not blinking anymore, no reset

Goofy23 · Post by **Goofy23** » Thu Jan 13, 2005 3:33 pm

Hello
i got a URC-7562.
I´ve tried to programm my Remote for a VDR with Lirc .
I´ve tried many ways, one way was to remap the VCR with a CD Code and then remap some Keys with the 994 mode.

My problem now is , ican not remove this last settings with 994.
I´ve tried a 980 and 981 Reset, now nothing works anymore but I have the problem that the Yellow Key does not react anymore, no blinking when pressing??????
I think physicaly the button is correct, but what is wrong.

I want to completely Reset my Remote, is there a posibilty over JP1, like a Cmos Reset?

Post by **The Robman** » Thu Jan 13, 2005 6:21 pm

When you did the 981 reset, did you get 4 short blinks? If so, that at least means your remote is working OK. Have you tried doing a keymove onto the yellow button? If the button doesn't respond during the keymvoe processing, it might be worn out.

Goofy23 · Post by **Goofy23** » Thu Jan 13, 2005 8:48 pm

Thanks for the Reply.
My English is not the best, i am German.

Yes i got 4 blinks, after 981

i tried to remap the yellow key, thats the case.

I go and get my dictionary and will see what "worn out" means.
What can i do?

I want to use or try the 0000 Vcr Code how can i be sure that every button is working with this code.
Can anyone give me the Keymagic code that i can try with my yellow cd key?
There is no CD player on it so i can programm the key to anythng.

Post by **The Robman** » Thu Jan 13, 2005 9:05 pm

"worn out" means that you have used the button too many times and it no longer works.

uwereinert · Post by **uwereinert** » Fri Jan 14, 2005 12:56 am

Goofy,

you could have it a little bit easier, look at http://groups.yahoo.com/group/jp1-de/

Uwe

Goofy23 · Post by **Goofy23** » Fri Jan 14, 2005 2:01 pm

thanks.
but i never used the usegroups before.

the Button is not worn out, cause it was used seldon before.
The Problem came with my remapping, how to unremap?
Reset the IRC?

Post by **The Robman** » Fri Jan 14, 2005 2:34 pm

A 981 reset will remove ALL user programming.

To test that the yellow button still works, try copying a working button onto it, like this...

1) Hold SETUP (MAGIC) button, 2 flashes
2) Type 994, 2 flashes
3) Press good button
4) Press yellow button, 2 flashes

The yellow button should now perform the same function as the good button that was copied.

Goofy23 · Post by **Goofy23** » Fri Jan 14, 2005 3:27 pm

he is working if i press twice the yellow cd button he respond, but not if i press once.
I forgot to mention before.
Now he works , after your instructions, thanks. but he got a faulty code now?
The code seems to remain on yellow key after reset cause i did the reset several times before, and didn´t got better.

uwereinert · Post by **uwereinert** » Sat Jan 15, 2005 10:02 am

Goofy23 wrote:he is working if i press twice the yellow cd button he respond, but not if i press once.

This is a feature of the URC for your own safety since the yellow button is the record button. So you could not send the record signal by accident.

Now he works , after your instructions, thanks. but he got a faulty code now?

Sorry, but you have to know the right button code by yourself.

Uwe

PS: Du solltest wirklich der Yahoo-Gruppe beitreten, dass würde die Angelegenheit erheblich vereinfachen. Mein Schulenglisch liegt auch schon über 20 Jahre zurück.