JP1 Remotes

1. Device: Pioneer Goldbox 1520
2. Type of device: Sat receiver
3. JP1 Remote model: 8810
4. JP1 user? Yes
5. Still have original remote? Yes
6. Checked Yahoo file section? Yes
7. Checked Pronto file section (at R/C)? Yes

My problem: The learned command works right, but when I use the data of decoded IR for protocol and EFC / OBC for build an upgrade with KM, I obtain only the buttons 0 - 9 and power to work, all the others don't.
I have decoded a CCF and have gained the same results of decodeIR that I have inserted in KM. Posted in the diagnosys area, link:
http://groups.yahoo.com/group/jp1/files ... oldbox.txt
Thanks for your help,
Valery

In KM, select:

button code = OBC
protocol name = RC5
device 1 = 10
device 2 = 110
device 3 doesn't matter

In functions, enter the OBC values and if a OBC value > 63, then enter 1 in the byte 2 column. This should do the trick.

Uwe

Hurrah! It works ... now can you learn me what I have done?
Thank You very much

After selecting protocol name = RC5, you should read the protocol help of KM. After this, you should know, what you have done

Uwe

OK, I am beginning to understand something...