View previous topic :: View next topic |
Author |
Message |
valery
Joined: 31 May 2004 Posts: 8
|
Posted: Wed Jan 12, 2005 2:09 am Post subject: Help with Sat receiver Pioneer Goldbox |
|
|
1. Device: Pioneer Goldbox 1520
2. Type of device: Sat receiver
3. JP1 Remote model: 8810
4. JP1 user? Yes
5. Still have original remote? Yes
6. Checked Yahoo file section? Yes
7. Checked Pronto file section (at R/C)? Yes
My problem: The learned command works right, but when I use the data of decoded IR for protocol and EFC / OBC for build an upgrade with KM, I obtain only the buttons 0 - 9 and power to work, all the others don't.
I have decoded a CCF and have gained the same results of decodeIR that I have inserted in KM. Posted in the diagnosys area, link:
http://groups.yahoo.com/group/jp1/files/Diagnosis%20Area/pioneer%20goldbox.txt
Thanks for your help,
Valery |
|
Back to top |
|
|
uwereinert Advanced Member
Joined: 27 Aug 2003 Posts: 153 Location: Chemnitz |
Posted: Wed Jan 12, 2005 2:42 am Post subject: |
|
|
In KM, select:
button code = OBC
protocol name = RC5
device 1 = 10
device 2 = 110
device 3 doesn't matter
In functions, enter the OBC values and if a OBC value > 63, then enter 1 in the byte 2 column. This should do the trick.
Uwe |
|
Back to top |
|
|
valery
Joined: 31 May 2004 Posts: 8
|
Posted: Wed Jan 12, 2005 3:47 am Post subject: |
|
|
Hurrah! It works ... now can you learn me what I have done?
Thank You very much |
|
Back to top |
|
|
uwereinert Advanced Member
Joined: 27 Aug 2003 Posts: 153 Location: Chemnitz |
Posted: Wed Jan 12, 2005 6:04 am Post subject: |
|
|
After selecting protocol name = RC5, you should read the protocol help of KM. After this, you should know, what you have done
Uwe |
|
Back to top |
|
|
valery
Joined: 31 May 2004 Posts: 8
|
Posted: Wed Jan 12, 2005 6:17 am Post subject: |
|
|
OK, I am beginning to understand something... |
|
Back to top |
|
|
|