JP1 Remotes

wofei · Joined: 30 Sep 2007 Posts: 3

Hi,
i have a Dream 600 ( URC-39930 )and i'm searching for the codes for my Hanseatic TV. The TV is labeled and i think its a Daewoo model.
The originalremote is R-46G22.
i know i need the jp1.x interface and i will get the parts on tuesday...
please help me and sorry for my bad english-i'm austrian....

1. Device: Hanseatic CTV70 1650-S (should be an Daewoo TV )
2. Type of device: TV
3. Year: 2004
4. JP1/UEI Remote model: URC-39930 Dream 600PVR
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a

sorry, i didn't seen this post....

lg
wofei

Evan_s · Joined: 24 Mar 2007 Posts: 313

Read the following post that is sticked at the top of the forum and please respond with the info.

http://www.hifi-remote.com/forums/viewtopic.php?t=49

wofei · Joined: 30 Sep 2007 Posts: 3

@evan s
done, sorry i didn't seen this post...
lg
wofei

wofei · Joined: 30 Sep 2007 Posts: 3

No idea for:

1. Device: Hanseatic CTV70 1650-S (should be an Daewoo TV )
2. Type of device: TV
3. Year: 2004
4. JP1/UEI Remote model: URC-39930 Dream 600PVR
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a

??

binky123 · Expert Joined: 14 Feb 2004 Posts: 1292

If none of the Daewoo device upgrades work then you'll probably have to learn the infrared signals from the original remote. There is some discussion on adding missing components to a URC-39930 here to make it a learning remote. You can also build a simple IR serial receiver. I've also had success hooking 2 wires from a VCR's IR sensor into pins on a PC's parallel port and running CaptureIR to sample the data.