Requesting an RDF mod

If you have a new remote that isn't recognized by RMIR, post the details here so we can help create a new RDF for it. Or, if there is an issue with an existing RDF or map, this is the place.
Post Reply
mr_d_p_gumby
Expert
Posts: 1370
Joined: Sun Aug 03, 2003 12:13 am
Location: Newbury Park, CA

Requesting an RDF mod

Post by mr_d_p_gumby »

This is directed primarily at Nils--

Since you are the keeper of the RDFs of late, it seems easier for me to just request some small changes to some RDFs, rather than me posting one in the JP1 RDF folder that you'd have to spend time reviewing for changes and then turning it into two versions. :roll:

1) SA_7SA_7 (Atlas DVR-PVR 5-Device).rdf
  • Please add these phantom buttons:
    phantom1 = $3C
    phantom2 = $3D
    discreteON = $3E
    discreteOFF = $3F

    Also, whatever you do to the URC-6131 regarding the new keymove format would apply to this remote as well.
2) CA00 (Navigator URC-43000B01).rdf
  • Please add this to the [FixedData] section:
    $015 = $00
TIA. If you'd rather have me modify them & post them, let me know.
Nils_Ekberg
Expert
Posts: 1689
Joined: Sat Aug 02, 2003 2:08 pm
Location: Near Albany, NY

Re: Requesting an RDF mod

Post by Nils_Ekberg »

mr_d_p_gumby wrote:This is directed primarily at Nils--

Since you are the keeper of the RDFs of late, it seems easier for me to just request some small changes to some RDFs, rather than me posting one in the JP1 RDF folder that you'd have to spend time reviewing for changes and then turning it into two versions. :roll:

1) SA_7SA_7 (Atlas DVR-PVR 5-Device).rdf
  • Please add these phantom buttons:
    phantom1 = $3C
    phantom2 = $3D
    discreteON = $3E
    discreteOFF = $3F

    Also, whatever you do to the URC-6131 regarding the new keymove format would apply to this remote as well.
2) CA00 (Navigator URC-43000B01).rdf
  • Please add this to the [FixedData] section:
    $015 = $00
TIA. If you'd rather have me modify them & post them, let me know.
I will take care of these for you. I was just getting ready to package a set so I will include this and hopefull get them posted tonight.
Nils_Ekberg
Expert
Posts: 1689
Joined: Sat Aug 02, 2003 2:08 pm
Location: Near Albany, NY

Re: Requesting an RDF mod

Post by Nils_Ekberg »

mr_d_p_gumby wrote:This is directed primarily at Nils--
  • Please add this to the [FixedData] section:
    $015 = $00
TIA. If you'd rather have me modify them & post them, let me know.
Mike

There was not a [FixedData] area in the CA00 (Navigator URC-43000B01).rdf so I added it

[FixedData]
$015 = $00

Will upload later today.
Post Reply