sweed
Joined: 12 Dec 2004 Posts: 1
|
Posted: Sun Dec 12, 2004 10:59 am Post subject: 2x6 JP1 connector - two 1x4 PC CD drive audio connectors |
|
|
Newbie warning -
Apologizing in advance for messaging errors...
Scrambling thru my parts drawer for an IDE cable to
hack, I found one still packaged with a CD audio cable.
It was easy to release the (red) connector sockets
and relocate them for xxxo instead of xxox
and the housings are deeper than ribbon cable Bergs,
so easier to remove.
I may hot-glue them together, or simply shorten
the jumper between pins 1 and 2 to help make
connector orientations less ambiguous.
I ran out and got a 15-2116 instead of struggling
with URC-8090B00 limitations and note reported
difficulties with fresh batteries. Swapping in a set
of NiCads should reduce voltage from nominal 6+
to 4.8V. |
|