JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Searching discretes for Humax digibox & Toshiba VCR

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
jerma



Joined: 16 Sep 2004
Posts: 23
Location: Vaasa, Finland

PostPosted: Tue Oct 12, 2004 2:28 am    Post subject: Searching discretes for Humax digibox & Toshiba VCR Reply with quote

Hi all.

I am trying to find descrete power on/off codes for 2 devices. I looked et the sticky's, the Yahoo files, and remote-central. But still i haven't found anything useful.

The first device is a HUMAX digital set top box for cable. I made the following update for it a while ago. It is using NEC1 protocol, with Device 0, subdevice 16.

The file: Humax-CX-1201C-Cable_Digibox.txt

Second device i am looking for the desretes, is a Toshiba VCR. I don't have the update file with me, but i'll check the protocol/device/subdev as i get home, and post them here.

Anyone can help me ?
_________________
Jerma @Finland, Vaasa
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18515
Location: Chicago, IL

PostPosted: Tue Oct 12, 2004 7:39 am    Post subject: Reply with quote

I don't know about the Humax, but you're almost certainly out of luck with the Toshiba. Toshiba is the biggest TOAD of them all, they've only just started including discrete codes with their newest TVs, but I doubt they've done anything with VCRs, and if yours is more than a few years old, it definitely doesn't have discretes.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
jerma



Joined: 16 Sep 2004
Posts: 23
Location: Vaasa, Finland

PostPosted: Tue Oct 12, 2004 11:34 pm    Post subject: Reply with quote

I found discrete ON and OFF at remotecentral for some HUMAX devices, but when i decode these (below) with IRTool, it gives me the same Device/code numbers for both actions.

Here are the HEX:

Power Off
0000 006d 0000 0022 0150 00a8 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0666

Power On
0000 006d 0000 0022 0150 00a8 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0666
_________________
Jerma @Finland, Vaasa
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18515
Location: Chicago, IL

PostPosted: Wed Oct 13, 2004 7:32 am    Post subject: Reply with quote

off = NEC2 0.48 OBC=128, EFC=189
on = NEC2 0.48 OBC=003, EFC=187
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
jon_armstrong
Expert


Joined: 03 Aug 2003
Posts: 1238
Location: R.I.P. 3/25/2005

PostPosted: Wed Oct 13, 2004 8:51 am    Post subject: Reply with quote

Jerma,

You need to have decodeIR.dll in the windows\system directory or have the modified version of IRTool in the same directory as IR.exe. Otherwise you go to the built in decoding in IRTool that is not very good.

When working correctly, you will get a little dialox box that pops up with the information Rob posted.
_________________
-Jon
Back to top
View user's profile Send private message Send e-mail Visit poster's website
jerma



Joined: 16 Sep 2004
Posts: 23
Location: Vaasa, Finland

PostPosted: Wed Oct 13, 2004 10:00 am    Post subject: Reply with quote

Thanks guys !

I got the IRTool working.

I tryed them on a different device (CD) by themselves making a new update, so i wouldn't mess up my cable config. Using NEC2 protocol, device 0, subdevice 48 and nothing happens.

So... at this time, there are no discretes for the HUMAX cable digibox. Sad
_________________
Jerma @Finland, Vaasa
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central