protocol = "?Archer" for my emerson A/B/C/D box

This is the JP1 beginners forum. There's no such thing as a stupid question in here, so post away, but this forum is just for JP1 users and people considering JP1, non-JP1 users please use the appropriate forum above!

Moderator: Moderators

Post Reply
usblipitor
Posts: 516
Joined: Fri Oct 10, 2003 10:06 pm
Location: Greenbelt, MD

protocol = "?Archer" for my emerson A/B/C/D box

Post by usblipitor »

I have a remote controlled A/B/C/D box (emerson brand) that switches between four "audio/left/right" sources (the yellow/white/red plugs.. I think they might be called A/V plugs?)

So I taught my URC-8910 the codes for the A/B/C/D box using the learn feature, then I went into IR and downloaded the remote into IR, and looked at what it had learned.

The protocol for the A/B/C/D box is listed as "?Archer" and listed the EFC codes for me ("A" is 078, "B" is 142)

When I went to KM to create a new device I found that there is no "?Archer" protocol (unless I am supposed to download it from yahoo jp1 site? i didnt see anything there about "?archer" in files section)

Does anyone know of any other options or should I just let these codes live on the remote as learned codes?

You people are so damn smart! :D
Top
jon_armstrong
Expert
Posts: 1238
Joined: Sun Aug 03, 2003 9:14 pm
Location: R.I.P. 3/25/2005
Contact:
Contact jon_armstrong

Post by jon_armstrong »

There is an upgrade for this http://groups.yahoo.com/group/jp1/files ... odes/Misc/ called Emerson Switch-KM.txt
-Jon
Top
usblipitor
Posts: 516
Joined: Fri Oct 10, 2003 10:06 pm
Location: Greenbelt, MD

awesome

Post by usblipitor »

It worked :)

Thank you!
Top
Post Reply

Return to “JP1 - Beginners”