View previous topic :: View next topic |
Author |
Message |
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Sun Oct 19, 2003 11:13 pm Post subject: protocol = "?Archer" for my emerson A/B/C/D box |
|
|
I have a remote controlled A/B/C/D box (emerson brand) that switches between four "audio/left/right" sources (the yellow/white/red plugs.. I think they might be called A/V plugs?)
So I taught my URC-8910 the codes for the A/B/C/D box using the learn feature, then I went into IR and downloaded the remote into IR, and looked at what it had learned.
The protocol for the A/B/C/D box is listed as "?Archer" and listed the EFC codes for me ("A" is 078, "B" is 142)
When I went to KM to create a new device I found that there is no "?Archer" protocol (unless I am supposed to download it from yahoo jp1 site? i didnt see anything there about "?archer" in files section)
Does anyone know of any other options or should I just let these codes live on the remote as learned codes?
You people are so damn smart! |
|
Back to top |
|
|
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Mon Oct 20, 2003 11:18 am Post subject: awesome |
|
|
It worked
Thank you! |
|
Back to top |
|
|
|