View previous topic :: View next topic |
Author |
Message |
cavourahpong
Joined: 13 Jun 2004 Posts: 18
|
Posted: Fri Aug 06, 2004 2:40 am Post subject: The rdf dosen't work for OneForAll URC-9960B01 |
|
|
Hi all,
I have some problems on using IR.exe for URC9960B01. Any one can help me?
I have use IR 507 and 509 with rdf: "KASAKAS0 (URC-9960 B01 One For All Kameleon).rdf" for downloading codes from and uploading codes to One Foe All URC9960B01 Remote, but it doesn't work.
When I press "download from remote" button in IR.exe, the below warning message displays:
"No data found in signature. This indicates that the interface isn't working property (unless you have manually cleared the signature bytes, in which case it's normal). Do you want to cancel the operation?"
When I press "yes" button to cancel it, another message displays: "Operation canceled. No data found in signature."
But when I press "No" on the cancel the operation message, it will let me to select rdf. And I select the same rdf file, "KASAKAS0 (URC-9960 B01 One For All Kameleon).rdf". And new warning message will be displayed, "Bad checksum at address $0000. Expected $9E $61, but found $00 $00".
And when I press "OK", another warning message will be displayed,"Dev Type 15 4095 is not currently assigned to a device button. Would you like to assign it now? (If not, the Key Move associated with the "Shift-Key127" button will be ignored.)
When I press "Yes", IR message will be displayed,"A device type of 15 is not defined for the current remote." But When I press "No", the message will be displayed again.
Thanks.
Cavourahpong |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Aug 06, 2004 7:32 am Post subject: |
|
|
Instead of selecting an RDF, go ahead and just download the data, then go to the Raw Data tab in IR and I expect you will find that it's all zeroes (hence, the "no sig" and "bad checksum" messages).
So, the question is, why are you getting all zeroes? This is either a problem with your remote or your interface. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
jherrick JP1 Vendor
Joined: 31 Dec 2003 Posts: 225 Location: South Berwick, ME |
Posted: Fri Aug 06, 2004 10:20 am Post subject: |
|
|
This sounds somewhat familiar. I think I had this happen to me once, with a different remote. Try a full reset, 981 style. I think the right way for the 9960 is:
SETUP (long press until another screen appears)
OTHER
9
8
1
(two or four blinks) |
|
Back to top |
|
|
cavourahpong
Joined: 13 Jun 2004 Posts: 18
|
Posted: Mon Aug 09, 2004 5:25 am Post subject: |
|
|
Hi,
I have used IR5.9 and IR5.10 with RDFs_for_IR_and_RM_Version_1.17 (URC-9960 B01 One For All Kameleon) for download codes from URC9960B01 remote, but it doesn't work. And the Raw data is not all "00".
And there is an IR message alret, "List index out of bounds (-1)". Besides, In the General tab-panel of IR application, all device type lettler boxs show "Error", and code = 2047.
In addition, The marco bar shows some memory is used in the General page of IR application. But I haven't used marco function on my remote, and I have reset the remote before using IR application for downloading the codes.
I do want to know what the happen?
Cavourahpong |
|
Back to top |
|
|
jherrick JP1 Vendor
Joined: 31 Dec 2003 Posts: 225 Location: South Berwick, ME |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Aug 09, 2004 9:16 am Post subject: |
|
|
Don't select an RDF during the download process, then save the IR file and post it in the Diagnosis Area. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
cavourahpong
Joined: 13 Jun 2004 Posts: 18
|
Posted: Mon Aug 09, 2004 8:55 pm Post subject: |
|
|
Hi,
I have reset it, and try again.
But there is an alert message, "Dev Type 15 4095 is not currently assigned to a device button. Would you like to assign it now? (If not, the Key Move associated with the "Shift-Key127" button will be ignored.)"
When I press "Yes", IR message will be displayed,"A device type of 15 is not defined for the current remote."
What can I do now?
Regards,
Cavourahpong |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Aug 09, 2004 11:06 pm Post subject: |
|
|
This tells me that IR still has the old RDF loaded. Go to File > New > Select, then select any remote you like (except the URC-9960), then do a fresh download from your remote, click OK if IR tells you that there's no RDF for this remote, and save the file. Then post it for us to look at.
I suspect that you have one of the new versions of the URC-9960 and our tools don't support this remote yet. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
cavourahpong
Joined: 13 Jun 2004 Posts: 18
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Wed Aug 11, 2004 7:25 am Post subject: |
|
|
please read my sig _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
cavourahpong
Joined: 13 Jun 2004 Posts: 18
|
Posted: Thu Aug 12, 2004 4:23 am Post subject: |
|
|
Hi,
I have use Ayre(Catalyst48) rdf, and saved in the Files > Diagnosis Area.
File name is IR2.zip;
Description: "problem on downlaod codes from URC9960B01"
Thanks
Cavourahpong |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Thu Aug 12, 2004 7:33 am Post subject: |
|
|
specifically, please read the 2nd item in my sig about posting links, then go back and fix the link in your previous post. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
cavourahpong
Joined: 13 Jun 2004 Posts: 18
|
|
Back to top |
|
|
cavourahpong
Joined: 13 Jun 2004 Posts: 18
|
Posted: Mon Aug 23, 2004 8:28 pm Post subject: |
|
|
Hi all,
How can my problem solved?
Regards,
Cavourahpong |
|
Back to top |
|
|
cavourahpong
Joined: 13 Jun 2004 Posts: 18
|
Posted: Sat Aug 28, 2004 11:14 am Post subject: |
|
|
Besides, using JP1 or wave
How can I download my learning keys and upload the arranged code? |
|
Back to top |
|
|
|