JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

captureIR Good setting

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Hardware
View previous topic :: View next topic  
Author Message
Buzywoman



Joined: 29 Jan 2007
Posts: 23
Location: QC,Canada

                    
PostPosted: Wed Apr 15, 2009 10:47 am    Post subject: captureIR Good setting Reply with quote

Hello all good morning,y have build a ir probe with qse158 for capture ir

y have the version: prototype 12 build 1 , if the latest build ? not find other new build in the file section.

the default seting wont work,after y have read about read me of digitrace y have set in captureIR max sample size: 32 768 and miracle working Wink

this is my setting working for me,y have lost the default setting and try to find the setting file for setting in captureir folder.
------------------------
Hardware

I/O base adress: 0378

Capture pin: 9

polarity: active hight
------------------
timing

post sampling delay: 1000

auto shut off: 60

max gap time: 400

max sample size: 32 768 ( the same as digitrace setting) work for me
--------------
diagnostic

debug level: 1
-------------------
advanced

thread polarity: 5
-------------------

this is a good setting ?

what's is the good setting for captureir and qse158 ? not find read me for the captureir setting.

Y have a dual core 2.7 and vista 32bits

tanks

buzywoman
_________________
A+
Buzywoman
Canadian French
Back to top
View user's profile Send private message Send e-mail
Buzywoman



Joined: 29 Jan 2007
Posts: 23
Location: QC,Canada

                    
PostPosted: Wed Apr 15, 2009 11:22 am    Post subject: Reply with quote

working yesterday ,digitrace and captureIR received signal and today captureIR not working only digitrace receive signal from remote ?

java problem or setting ? no idea
_________________
A+
Buzywoman
Canadian French
Back to top
View user's profile Send private message Send e-mail
Buzywoman



Joined: 29 Jan 2007
Posts: 23
Location: QC,Canada

                    
PostPosted: Thu Apr 16, 2009 5:53 am    Post subject: Reply with quote

if captureIR not work just open digitrace and captureIR work again.

????
_________________
A+
Buzywoman
Canadian French
Back to top
View user's profile Send private message Send e-mail
binky123
Expert


Joined: 14 Feb 2004
Posts: 1292

                    
PostPosted: Thu Apr 16, 2009 4:05 pm    Post subject: Reply with quote

maybe you have to choose "run as administrator" under vista? it looks like a permissions problem but I'm not that familiar with vista.
Back to top
View user's profile Send private message
Buzywoman



Joined: 29 Jan 2007
Posts: 23
Location: QC,Canada

                    
PostPosted: Fri Apr 17, 2009 6:56 am    Post subject: Reply with quote

Hello binky123,good morning ,y have disabled uac in vista.

try test to my laptop with pcmci db25 port,but before try the second test y need mod to grounded 18 to 25 pin in my db25,because jtag 18-25 grounded run and ir not work with my laptop.
_________________
A+
Buzywoman
Canadian French
Back to top
View user's profile Send private message Send e-mail
Mark Pierson
Expert


Joined: 03 Aug 2003
Posts: 3017
Location: Connecticut, USA

                    
PostPosted: Fri Apr 17, 2009 10:03 am    Post subject: Reply with quote

Buzywoman wrote:
have disabled uac in vista.
That's not the same as running as an administrator.
_________________
Mark
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Buzywoman



Joined: 29 Jan 2007
Posts: 23
Location: QC,Canada

                    
PostPosted: Fri Apr 17, 2009 10:18 am    Post subject: Reply with quote

hello,right click and run as administrator ,is ok.

but my problem,removed printer port pin 1 power is switched qse158 to usb power ,working,reboot and stop working ,removed usb power to return pin1 power and y asume y have burned qse158.

ordering qse158 and retry
_________________
A+
Buzywoman
Canadian French
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Hardware All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control