JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Updated Maps and Images for 10-14-03

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - New Remotes & RDFs
View previous topic :: View next topic  
Author Message
Nils_Ekberg
Expert


Joined: 02 Aug 2003
Posts: 1689
Location: Near Albany, NY

                    
PostPosted: Tue Oct 14, 2003 5:39 pm    Post subject: Updated Maps and Images for 10-14-03 Reply with quote

Greg

I uploaded a complete set of RM ONLY RDF's to the jp1 group tools section that are compliant with RM ONLY since they have the generic button names. I think it would be best at this time to stop distributing the RDF's in the RM distribution and just point to these.

RM Only RDF's

NOTE: THESE RDFs WILL NOT WORK CORRECTLY WITH THE CURRENT VERSION OF IR.EXE
Use those distributed with or for IR.EXE until the next release of IR.EXE

The following is just 3 maps to support the above RDF's uploaded to the jp1 group. They will need to be checked in at SourceForge.

RM Maps Updates

Both downloads are required for RM..........
_________________
Nils
Files Section
Diagnosis File Section
Back to top
View user's profile Send private message Send e-mail
Mark Pierson
Expert


Joined: 03 Aug 2003
Posts: 3017
Location: Connecticut, USA

                    
PostPosted: Tue Oct 14, 2003 8:08 pm    Post subject: Reply with quote

I think the following files should be renamed to keep consistent with our effort to standardize the names.
Code:
Current Filename:                            New Filename:
SA_7SA_7 (UEI Atlas DVR-PVR 5-Device).rdf..: SA_7SA_7 (Atlas DVR-PVR 5-Device).rdf
GIDAGID0 (General Instruments DRC 400).rdf.: GIDAGID0 (DRC400 General Instruments).rdf
GI2KG2K0 (Motorola DRC400).rdf.............: GI2KG2K0 (DRC400 Motorola).rdf
INTU (URC-31XXXB01 Intuitive).rdf..........: INTU (Intuitive URC-31XXXB01).rdf
CA00 (URC-43000B01 Navigator).rdf..........: CA00 (Navigator URC-43000B01).rdf
CYC0 (URC-44000B00 Navigator).rdf..........: CYC0 (Navigator URC-44000B00).rdf
CYC1 (URC-44000B02-B04 Navigator).rdf......: CYC1 (Navigator URC-44000B02-B04).rdf
RSL6RSX3 (15-1994 extender 3).rdf..........: RSL6RSX3 (RS 15-1994 extender 3).rdf
R6H0R6x1 (15-2104 extender 1).rdf..........: R6H0R6x1 (RS 15-2104 extender 1).rdf
6_80_2x3 (6012 x3 2K).rdf..................: 6_80_2x3 (URC-6012 x3 2K).rdf
6_80_8x3 (6012 x3 8K$1815).rdf.............: 6_80_8x3 (URC-6012 x3 8K$1815).rdf

_________________
Mark
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Nils_Ekberg
Expert


Joined: 02 Aug 2003
Posts: 1689
Location: Near Albany, NY

                    
PostPosted: Tue Oct 14, 2003 8:27 pm    Post subject: Reply with quote

Works for me. I just didn't start renaming since I didn't see a final decision. Maybe I missed it.

Do you see any in there that can be deleted. I am pretty sure I got rid of old dups but I am not 100% sure.

Thanks
_________________
Nils
Files Section
Diagnosis File Section
Back to top
View user's profile Send private message Send e-mail
Nils_Ekberg
Expert


Joined: 02 Aug 2003
Posts: 1689
Location: Near Albany, NY

                    
PostPosted: Tue Oct 14, 2003 9:09 pm    Post subject: Reply with quote

I just uploaded version 1.01 of the RM only RDF's with the name changes suggested by Mark. These are external name changes only. Does anyone think we should go through the internal names?

RM Only RDF's

NOTE: THESE RDFs WILL NOT WORK CORRECTLY WITH THE CURRENT VERSION OF IR.EXE
Use those distributed with or for IR.EXE until the next release of IR.EXE
_________________
Nils
Files Section
Diagnosis File Section
Back to top
View user's profile Send private message Send e-mail
cdhixson



Joined: 04 Aug 2003
Posts: 48
Location: Charlotte, NC USA

                    
PostPosted: Wed Oct 15, 2003 7:02 am    Post subject: Re: Updated Maps and Images for 10-14-03 Reply with quote

Nils,

I uploaded my version of the RS 15-1994 with extender 5 rdf file to the JP1-KM files area. This rdf should only be used in RM for now.

RS 15-1994 Extender 5 RDF

Also, I noticed that you didn't include a generic name for the Center{Exit} button in all of the RS 15-1994 rdf files. I think the generic name should be "Exit." I've included this change in my rdf file.
_________________
Chris
Back to top
View user's profile Send private message Send e-mail
Nils_Ekberg
Expert


Joined: 02 Aug 2003
Posts: 1689
Location: Near Albany, NY

                    
PostPosted: Wed Oct 15, 2003 7:30 am    Post subject: Re: Updated Maps and Images for 10-14-03 Reply with quote

cdhixson wrote:
Nils,

I uploaded my version of the RS 15-1994 with extender 5 rdf file to the JP1-KM files area. This rdf should only be used in RM for now.

RS 15-1994 Extender 5 RDF

Also, I noticed that you didn't include a generic name for the Center{Exit} button in all of the RS 15-1994 rdf files. I think the generic name should be "Exit." I've included this change in my rdf file.

Thanks Chris. I will include it. I wasn't sure which way to go on the Center{exit} but exit was my first choice but held off for a second pass.
_________________
Nils
Files Section
Diagnosis File Section
Back to top
View user's profile Send private message Send e-mail
gfb107
Expert


Joined: 03 Aug 2003
Posts: 3411
Location: Cary, NC

                    
PostPosted: Thu Oct 16, 2003 1:18 pm    Post subject: Reply with quote

"O80a (RS 15-1925 6-in-1 IR_RF).rdf" should be removed.

Not sure which of "O80a (RS 15-1925_1918_1919).rdf" or "O80a (RS 15-1925 and 15-1918 and 15-1919).rdf" is more current, but the use of underscores is more consisent with how other remotes are named.

It is also better for a new feature in v0.74, which will be coming soon.
_________________
-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)
Back to top
View user's profile Send private message Visit poster's website
gfb107
Expert


Joined: 03 Aug 2003
Posts: 3411
Location: Cary, NC

                    
PostPosted: Thu Oct 16, 2003 2:54 pm    Post subject: Reply with quote

Also, these sets of RDFs don't seem to have any internal differences, but the signatures are slightly different. This results in identical entries in RM which is confusing:

OEM3OEM0 (ReplayTV Version1).rdf
OEM3OEM1 (ReplayTV Version1).rdf

OEM3OEM0 (ReplayTV Version2).rdf
OEM3OEM2 (ReplayTV Version2).rdf

Is there anything that can be done about these?
_________________
-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)
Back to top
View user's profile Send private message Visit poster's website
Nils_Ekberg
Expert


Joined: 02 Aug 2003
Posts: 1689
Location: Near Albany, NY

                    
PostPosted: Thu Oct 16, 2003 5:54 pm    Post subject: Reply with quote

My guess is that the OEM3OEM0 (ReplayTV Version2).rdf one can go based on the the 3 different signatures and this being the redundant one. That would leave the 3 signatures 0, 1 and 2. They should probably also be renamed version 1, 2 and 3.

I will investigate further but would welcome any comments.
_________________
Nils
Files Section
Diagnosis File Section
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - New Remotes & RDFs All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control