View previous topic :: View next topic |
Author |
Message |
ck747
Joined: 21 Jul 2004 Posts: 19
|
Posted: Wed Jul 21, 2004 1:52 am Post subject: URC8811 remote and Denon 3802 receiver |
|
|
Hi all:
I am just a starter and built the ultra JP1 interface two days ago. I am able to get the URC8811 to learn function from the Denon remote.
On this new remote, the device setup code for Denon is 1160 or 1104. I understand 8811 would not accept any advanced codes for Denon. So I want to create the upgrade code.
On the IR software, there are two Device numbers for Denon protocol, either 2 or 12.
I can get either one of them working as upgrade code but not able to get both working.
I have tried to set up two device setup code for Denon (0160 and 0004) on each device number, but only function worked under 0160
Question: what do you do if you have two device numbers on the same protocol? Please help
Thanks
ck747 |
|
Back to top |
|
|
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
Posted: Wed Jul 21, 2004 5:36 am Post subject: |
|
|
There are a number of Denon upgrade files here that use the Denon combo protocol that allows the commands from both devices to be in one upgrade. Most Denon commands work across the board and there is an upgrade there for a 3803 and one from Rob with all Denon commands, either of those should get you started. _________________ -Jon |
|
Back to top |
|
|
ck747
Joined: 21 Jul 2004 Posts: 19
|
Posted: Wed Jul 21, 2004 11:36 am Post subject: |
|
|
Many thanks
I got the ideas from your web link and will try it out tonight.
Great help
ck747 |
|
Back to top |
|
|
|