View previous topic :: View next topic |
Author |
Message |
ewr101
Joined: 15 Jul 2004 Posts: 4
|
Posted: Thu Jul 15, 2004 6:51 pm Post subject: what have i got??? |
|
|
i have this remote i got from a friend who works at a cable company. he got it for me because it was free,had the buttons i needed and it was the newest remote they had. i can,t get the thing to work my satellite system. (hughs). i have the code (0749) but i think the remote is locked on to the type of cable box they use. i took the remote apart to get some #s from inside and this is what it said- uei-sa explorer 8000 [qfp] urc-1054bx-1-xxxx rev:02 030304. i have looked everywhere for programming it to operate my dish but can't find anything. the uei web site said it's an atlas dvr/pvr for the new digital recording set top cable boxes. please help!!!! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Thu Jul 15, 2004 7:19 pm Post subject: |
|
|
Does it have a 6-pin JP1 connector? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
ewr101
Joined: 15 Jul 2004 Posts: 4
|
Posted: Thu Jul 15, 2004 9:20 pm Post subject: |
|
|
yes, above the batteries. |
|
Back to top |
|
|
ewr101
Joined: 15 Jul 2004 Posts: 4
|
Posted: Thu Jul 15, 2004 9:39 pm Post subject: |
|
|
also, do you know why i can't find anything one this remote except that it is from uei? i typed all the info. i gave you in my search bar and in specific websites (remote control sites such as this) and always got a "no results found" answer. maybe it's me but as easy as this was to get a hold of i would think alot of people would have them. also is there a way other than the jp-1 (which i know nothing about, newbie) to unlock the cable button from only operating the digital box?? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Thu Jul 15, 2004 9:50 pm Post subject: |
|
|
I'm not familiar with this remote, but you could try this...
1) Press and hold the SETUP button (however it might be labelled), wait for 2 flashes
2) Type 977, 2 or 4 flashes (I can't remember)
Then try programming the cable button.
Of course, there's no guarantee that the code you need is in this remote, and if it isn't you will need JP1. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mr_d_p_gumby Expert
Joined: 03 Aug 2003 Posts: 1370 Location: Newbury Park, CA |
Posted: Thu Jul 15, 2004 11:37 pm Post subject: |
|
|
This definately sounds like the Atlas DVR/PVR 5-device. There are no model numbers or names anywhere on the remote. "Powered by UEI" is molded into the back of it, though. Does it look like this?
If it is an Atlas, it is a JP1 remote, and it is supported by the JP1 tools. It does have a cable setup lock, and to unlock it, you have to:
1) Press Cable button, then press an hold SETUP until the Cable button blinks twice.
2) Type 982. If you get 4 blinks of the Cable button, then it is unlocked. Two blinks means it is locked.
If it is locked, repeat the steps above. Once it is unlocked, you should be able to enter a new setup code.
There's also another lock that locks all the channel buttons to the Cable device. To unlock that:
1) Press the Cable button, then press and hold the SETUP button, wait for 2 flashes
2) Type 973. then channel- (down), get 2 flashes of the Cable button.
Of course, all this is easier with a JP1 cable. Then you could just uncheck the checkboxes in the IR program. (Hint, hint... 8) ) _________________ Mike England |
|
Back to top |
|
|
mr_d_p_gumby Expert
Joined: 03 Aug 2003 Posts: 1370 Location: Newbury Park, CA |
Posted: Fri Jul 16, 2004 12:05 am Post subject: |
|
|
Also, the Cable/0749 setup code is NOT in the remote, so you'll need a JP1 cable to add an upgrade. The only Cable/Satellite setup codes available are 0476, 0869, and 1877. (Pretty sad for a Cable-centric remote.)
The remote will only let you program macros on the 3 special macro keys, but you can put macros on almost any key with JP1.
On the bright side, it does have all the right buttons for controlling a PVR, and is a very capable remote. _________________ Mike England |
|
Back to top |
|
|
ewr101
Joined: 15 Jul 2004 Posts: 4
|
Posted: Fri Jul 16, 2004 10:47 am Post subject: |
|
|
thanks for the help. i will try all of the suggestions when i get off work and post another reply. does radio shack stock jp-1 connectors and anything else i might need to get it working? i know i could just go buy a remote that did everything i want it to do but after messing with this thing for a week i want to show it who's in control. ha ha ha |
|
Back to top |
|
|
|