JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

One for All - URC 8910 - Fully Learning?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Non-JP1
View previous topic :: View next topic  
Author Message
phunzoid



Joined: 16 Jun 2004
Posts: 2

PostPosted: Wed Jun 16, 2004 12:10 pm    Post subject: One for All - URC 8910 - Fully Learning? Reply with quote

can someone please confirm if the URC8910 is fully learning capable for ALL buttons (except the Device selection buttons), and not just the 4 "Learning" keys

the manual says ALL keys can be "taught", but i've read comments claiming only the 4 special keys can be taught

i want to buy one, but only if i can program all the keys Rolling Eyes
Back to top
View user's profile Send private message
Nils_Ekberg
Expert


Joined: 02 Aug 2003
Posts: 1689
Location: Near Albany, NY

PostPosted: Wed Jun 16, 2004 12:22 pm    Post subject: Reply with quote

Confirmed... All but selected buttons can be learned to.. Due to memory constraints only 20 to 25 buttons can be learned.
_________________
Nils
Files Section
Diagnosis File Section
Back to top
View user's profile Send private message Send e-mail
johnsfine
Site Admin


Joined: 10 Aug 2003
Posts: 4766
Location: Bedford, MA

PostPosted: Wed Jun 16, 2004 12:22 pm    Post subject: Reply with quote

You can learn to almost any key.

But the learning capacity is fairly limited.

The capacity is shared by all device modes. You have enough capacity to learn all the functions of a typical remote, or to learn a few functions each for every device mode. But all the functions from a single remote might be too much if it has more than typical number or length of signals, and learning all the signals from several remotes is almost certainly too much.

But the form learned signals are stored in is just one choice (the worst) for programming keys in a JP1 remote. With a JP1 cable and a little effort you probably have enough memory in the remote to program every key of every device mode to do what you want it to do.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
phunzoid



Joined: 16 Jun 2004
Posts: 2

PostPosted: Wed Jun 16, 2004 2:54 pm    Post subject: Reply with quote

ok, thanks for the replies

the reason i want to buy a "learning" remote is mainly to replace a cheap "generic" X-Box remote i bought on e-bay

i have another "universal" remote, but the IR dongle that came with the generic remote is not compatible with RCA codes like the "official" MS XBox dongle/remote is

and searching for the correct code w/ my current universal didn't work Confused
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Non-JP1 All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central