| View previous topic :: View next topic |
| Author |
Message |
drtaul
Joined: 13 Jun 2004
Posts: 2
Location: Apex, NC
|
 Posted: Sun Jun 20, 2004 2:20 pm Post subject: RM v.0.99 airboard .rmdu file will not load |
 |
|
Just startted working w/ JP1 URC-8910 remote this weekend.
I loaded in the "Airboard-KM-All Commands.txt" file so I can set up for mythtv.
When I load in this txt file i get the prompt:
Could not find an exact match for the remote "15-1994". Choose on from the list below:" ... I chose the RS 15-1994 6-in-1 Smart.
After loading in this KM file successfully, I switched from the 15-1994 remote to the URC-8910 remote. I then save the setup as Airboard.rmdu.
If I close RM and attempt to open the Airboard.rmdu file, it doesn't seem to load, and the description stays blank.
I loaded in the RDF files yesterday from yahoo/jp1 group/files/tools
| Quote: | RDFs for IR and RM Version 1.17.htm
These RDFs only work in RemoteMaster and IR350 (or later) |
Here is what I see at the end rmaster.err file where it seems to be trying to load in the Airboard.rmdu file.
Seraching for remote with name URC-8910
Geenrating deviceImporter for protocol Manual Settings
ProtocolParms='null'
Button 0 adding reference to 0 / )-Dn
Button 1 adding reference to 1 / !-Dn
Button 2 adding reference to 2 / @-Dn
Button 3 adding reference to 3 / #-Dn
Button 4 adding reference to 4 / $-Dn
Button 5 adding reference to 5 / %-Dn
Button 6 adding reference to 6 / ^-Dn
Button 7 adding reference to 7 / &-Dn
Button 8 adding reference to 8 / *-Dn
Button 9 adding reference to 9 / (-Dn
Button VOL+ adding reference to **53**
Button VOL- adding reference to **5D**
java.lang.NullPointerException
at com.hifiremote.jp1.DeviceUpgrade.getFunction(DeviceUpgrade.java:262)
at com.hifiremote.jp1.DeviceUpgrade.getFunction(DeviceUpgrade.java:250)
at com.hifiremote.jp1.DeviceUpgrade.load(DeviceUpgrade.java:701)
at com.hifiremote.jp1.DeviceUpgrade.load(DeviceUpgrade.java:569)
at com.hifiremote.jp1.DeviceUpgrade.load(DeviceUpgrade.java:560)
at com.hifiremote.jp1.KeyMapMaster.loadUpgrade(KeyMapMaster.java:841)
at com.hifiremote.jp1.KeyMapMaster.actionPerformed(KeyMapMaster.java:650)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source) |
|
| Back to top |
|
 |
drtaul
Joined: 13 Jun 2004
Posts: 2
Location: Apex, NC
|
| Posted: Sun Jun 20, 2004 2:25 pm Post subject: Additional Info |
|
|
I should mention that if I continue on after loading in the KM file for the airboard keyboard, and setup my URC-8910 keys up, I am able to move the data over to IR.exe and upgrade my remote..... did it several times last night.
Its just that is I save my setup and try to reload it, I can't... thus losing my setup. |
|
| Back to top |
|
|
gfb107
Expert
Joined: 03 Aug 2003
Posts: 3411
Location: Cary, NC
|
| Posted: Mon Jun 21, 2004 10:30 am Post subject: |
|
|
This is a bug in RM.
When loading a .RMDU file, it can't handle functions with no name.
If you look at the .RMDU file (in a text editor) generated, you will see two functions defined that have only notes as follows:
| Code: |
...
Function.18.notes=OBC\=000
...
Function.24.notes=OBC\=000
...
|
As a workaround, after you load the KM file in RM, go to the Functions tab and delete the 2 functions that have no name, them save the upgrade. You should be all set.
1.
_________________
-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST) |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
