4 way Toadtog toggle question

afaa · Post by **afaa** » Tue Jun 15, 2004 1:15 pm

I want to do speaker A/B switching.
The 4 states are

1: A
2: AB
3: B
4: None

So in doing my research I found this example: 6131_1-7.zip

Here are the keymoves from the above file:

/* 4 way Toadtog to toggle between 4 audio modes */
21 AUD PIP <N/A> VCR/DVD 1800 $E1 $3E $40 *** 005 or 016
22 AUD Phantom2 <N/A> VCR/DVD 1800 $71 $10 $37 $3F *** 137 or 187
23 AUD Phantom3 <N/A> VCR/DVD 1800 $60 017 (aka 273 or 529)
24 AUD Phantom4 <N/A> VCR/DVD 1800 $71 $26 $2E $3F *** 137 or 187

Will the gurus please jump in and help explain how this works and how I can apply to my situation?

Thanks

johann83 · Post by **johann83** » Tue Jun 15, 2004 2:10 pm

Are you using the latest 5.0x version of IR? If so, the ToadTogs should be decoded in the GUI, making them much easier to understand. I'd recommend taking a look at that first (if you haven't already) since it really makes this type of thing much simpler.

If that doesn't help, I'm sure someone else can post some pointers. I don't have IR on this PC and probably won't have time to post back later when I do. If you get no help before tomorrow, I'll try to see what I can do.

Regards,
Matt

afaa · Post by **afaa** » Tue Jun 15, 2004 3:05 pm

I'm using IR503 and I have taken advantage of the Special Protocol Builder (A great feature BTW). I think I kind of understand what the author did with the 4 way Toadtog but not exactly sure how or why it worked. I can't seem to find much information / documentations on multi-toadtog.