View previous topic :: View next topic |
Author |
Message |
RickyG
Joined: 24 May 2004 Posts: 2
|
Posted: Mon May 24, 2004 3:54 pm Post subject: URC9910 and Sony SLV-D300P advanced code help |
|
|
Hello newbie here.
Here is my situation. I have a new 9910 and have upgraded the code 0864 for the DVD/VCR via the phone with OFA. I am unable to get to the "SETUP" screen, on the unit itself. I am able to get to the display settings while the DVD is playing but not the "setup". This area is where you change the screen type, audio options, etc..... I have tried the keymover and added the advanced code for the "setup" button, but no luck. Has anyone figured this keystroke out, with the advanced codes? I am starting at the top and working my way down the list from 1-100?, but that takes for ever.... Any suggestions? Thanks in advance... |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Mon May 24, 2004 4:53 pm Post subject: |
|
|
What EFC number did you try for "setup" and what instructions did you use for doing a KeyMove of an advanced code?
I looked at RHM's info for this device and I think the EFC number for setup is 159.
The OBC numbers (not the numbers you need) for this device are documented here:
http://www.hifi-remote.com/sony/Sony_vdcombo.htm
Notice the OBC for setup is 77.
The translation table OBC to EFC is documented here
http://www.hifi-remote.com/sony/Sony_efctable.htm
Notice the EFC for OBC 77 is 159 |
|
Back to top |
|
|
RickyG
Joined: 24 May 2004 Posts: 2
|
Posted: Mon May 24, 2004 11:50 pm Post subject: Thanks |
|
|
Thank you very much. I guess I "read" that page but obviously not all of it. That worked like a champ. I appreciate you taking the time to help me out. RickyG |
|
Back to top |
|
|
|