Page 1 of 1
Discrete codes for Emerson EWD7003 DVD player
Posted: Sun May 02, 2004 12:51 pm
by joec1936
I have not been able to locate the discrete on/off codes for my Emerson EWD7003 DVD player, set up code 0675.
Does anyone have knowledge of these codes? Thanks
Posted: Sun May 02, 2004 3:12 pm
by jon_armstrong
I don't know for sure but it probably doesn't have discrete power codes. Have you tried the Play command from Off. If that works, then a macro for Play|Stop=On and Play|Power=Off
Posted: Mon May 03, 2004 9:05 am
by joec1936
jon_armstrong wrote: Have you tried the Play command from Off. If that works, then a macro for Play|Stop=On and Play|Power=Off
I'm not sure what your recommendation means. What is "Play command from OFF", and what is " Play|Stop=On and Play|Power=Off"
Posted: Mon May 03, 2004 9:27 am
by Mark Pierson
If the unit is powered OFF and you press Play, does it turn ON?
If so, then you can probably use macros to simulate the discrete power commands. To turn the unit ON, you would send "Play;Stop". To turn it OFF, "Play;Power"
Posted: Mon May 03, 2004 1:01 pm
by joec1936
Mark Pierson-Tried your suggestion with the DVD and it worked. Thanks for your help
Posted: Mon May 03, 2004 1:48 pm
by Mark Pierson
That's was Jon's suggestion... I was just repeating what he said!
Glad it worked for you.