Yamaha RX-V992

[tc88518]

Hello,
I thought it would be easy to buy a All For One remote, URC-8910, and be a couch potato, but once again this wonderfull world of technology requires a new learning process. I have a Yamaha RX-V992 receiver, I am able to do most of the functions with the 1176 code enterred and learning keys. One problem, I can't turn on the unit with the remote. Tech support said that "What we would need to use for this is advanced function codes".

Code: Select all

URC 8910/URC9910 

To achieve advanced functions 
1)  Hold set until screen reads "code set" 
2)  Arrow down eight times to "key mover" 
3)  Press select, it should read "from mode" 
4)  Press the device key that you want the function to come from (ex: TV) 
5)  The screen will read "from key" 
6)  Tap the set button and it will read "SYNT" 
7)  Then press 3-digit advanced function code 
8)  Press select screen will read "to mode" 
9)  Tap the device key you want the function to go to (ex: TV) 
10) Screen will read "to key" 
11) Then tap the key where you want function to go to (ex: select) 
12) Screen will flash success then exiting setup will appear 
13) LED screen will return to main screen 


Audio/1176 - Amp/Tuners ---- <TUN Group>  

375 A/B/C/D/E      485 DSP Effect U  248 Power On    554 Disc
498 Diagnostic M   233 DSP Effect D  246 Power Off   558 VCR3 

AUDIO AMP/TUNER. 
300 9...............Cable             300 8...............Cable 
369 6...............CD                560 ................DVD 
624 3...............DVD/LD            306 BAND............MD 
621 7...............Phono             565 PLAY............Play 
506 POWER...........Power Toggle      377 CHANNEL DOWN /.Preset Down 
629 CHANNEL UP .....Preset Up         243 VOLUME DOWN.....Rm 2 Volume Down 
243 MUTE............Rm 2 Volume Down  495 VOLUME UP.......RM 2 Volume Up 
300 9...............Satellite         300 8...............Satellite 
308 FAST FORWARD....Search Forward    568 REWIND..........Search Reverse 
311 SKIP FORWARD....Skip Forward      571 SKIP REVERSE....Skip Reverse 
313 STOP............Stop              627 4...............Tape 
367 5...............Tuner             497 INPUT...........TV/DBS 
237 1...............V-Aux             622 2...............VCR 1 
370 0...............VCR 2 

Well at step 7 I enter 248 then "select" and I get a "invailed error"
Any suggesstions?

Thanks,
Bake

[MaskedMan]

Try, Try, again

1. press RCVR/AMP
2. press and hold SET
3. scroll down to KEYMOVER
4. press SELECT
5. press RCVR/AMP
6. tap SET
7. enter 2-4-8
8. press SELECT
9. press RCVR/AMP
10 pick a key

[The Robman]

Well at step 7 I enter 248 then "select" and I get a "invailed error" Any suggesstions?

Did the screen read "SYNT" before you started typing 248? If not, you did something wrong prior to that. I just walked through your instructions using a URC-8910 myself and they're exactly correct.

Btw, 248 is the "Discrete On" code, the regular POWER code is 506.

[tc88518]

Hey thanks for the replies. I'm at work now, so I'll try this when I get home and update you.

Bake

[tc88518]

One other thing, I'm confused as to line 4 "from key". Why do you want it to come from somewhere? The generic suggestion was "TV".

bake

[johnsfine]

One other thing, I'm confused as to line 4 "from key". Why do you want it to come from somewhere? The generic suggestion was "TV".

A KeyMove needs two kinds of source information: A setup code and a command.

The "from mode" is the way of getting the setup code. The KeyMove will copy whatever setup code was last programmed for the device mode you select in that step.

The "from key" prompt indicates that it wants the command. The "normal" method of providing the command is to press the key that the command should be copied from. But you want an "advanced" command, which can't be copied from a key, so you provide the three digit EFC number of the command.