View previous topic :: View next topic |
Author |
Message |
fjmet
Joined: 28 Mar 2004 Posts: 18 Location: Florida |
Posted: Sat Apr 24, 2004 7:38 pm Post subject: Need Panasonic TV descrete codes |
|
|
Have Pan tv Big screen. Works partialy with device 250 or 128. Have looked at all the Pan codes at Yahoo. Vid1-Vid4, component1, component2, aspect-full and aspect-zoom work good under Pan 128. Cannot get Aspect-Just(051 4), Aspect-Normal(178 4), and Input-TV/Tuner(181) to work at all. Anyone have any suggestions??? Using an Atlas DVR non-learning remote.
Frank _________________ Frank |
|
Back to top |
|
|
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
Posted: Sat Apr 24, 2004 8:22 pm Post subject: |
|
|
Frank,
I made some suggestions in this thread
Your problem is one of three things:
1. You made a mistake in how you tested the commands
2. The TV doesn't respond to those commands
3. The TV responds to some other command
In this case I think the answer is 2. because the other commands that you tried worked and about a year ago "Bogdan" tested all 512 commands for Panasonic:128.0 and 128.4 and I don't think he found any other commands.
So since 1 and 3 are unlikely, then you are probably stuck with what you have. I suggested several work arounds, did you try those? Do they work? There are a bunch of Panasonic Plasma owners who don't even have discrete input commands, so you are probably lucky by comparison.
Finally, it is not a good idea to start another thread to discuss the same problem, since among other things you gave a very vague description of the problem and someone else may waste a lot of time going through the basics as you and I have already done. If you want to get someone to read it then just reply to the previous thread. If you have replied but no one answered just wait a few days and "bump" it to get the regulars here to take another look. _________________ -Jon |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sun Apr 25, 2004 11:14 am Post subject: |
|
|
Frank, please keep this in the original thread. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|