JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Automation Systems RC-2205 Upgrade

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Code Search (Closed)
View previous topic :: View next topic  
Author Message
DPE



Joined: 05 Oct 2003
Posts: 10
Location: Austin, Tx

                    
PostPosted: Sun Oct 05, 2003 5:49 pm    Post subject: Automation Systems RC-2205 Upgrade Reply with quote

I'm using a URC-9910 remote and would like to implement the extender for this remote. I currently am using only one learned signal, and would like to create an upgrade for it in order to use it with the extender.

I have had to learn the command to control an in-wall IR light switch. The switch is manufactured by Automation Systems (http://www.automation.com.hk) . The command works in the following manner. A quick press and release of the button will toggle the light on and off. Pressing and holding the button will cause the light to dim down/up.

The IR.exe decodes the the quick press and release as:

+1266 -424 +422 -1268 +422 -1268 +1266 -424 +422 -1268 +422 -1268 +422 -1268 +422 -1268 +422 -1268 +1266 -424 +422 -1268 +422 -35084 +1266 -424 +422 -1268 +422 -1268 +1266 -424 +422 -1268 +422 -1268 +422 -1268 +422 -1268 +422 -1268 +1266 -424 +422 -1268 +422 -130648

This data is in the top decode pane ("Sent once when key is pressed")

A button hold is decoded as:

+1254 -418 +418 -1272 +418 -1272 +1254 -418 +418 -1272 +418 -1272 +418 -1272 +418 -1272 +418 -1272 +1254 -418 +418 -1272 +418 -35342 +1254 -418 +418 -1272 +418 -1272 +1254 -418 +418 -1272 +418 -1272 +418 -1272 +418 -1272 +418 -1272 +1254 -418 +418 -1272 +418 -89624

This data is in the middle decode pane ("Sent repeatedly while key is being held").

The reported frequency is 37914.

Thanks in advance for any help/suggestions!

-Dave
Back to top
View user's profile Send private message
jon_armstrong
Expert


Joined: 03 Aug 2003
Posts: 1238
Location: R.I.P. 3/25/2005

                    
PostPosted: Sun Oct 05, 2003 8:15 pm    Post subject: Reply with quote

I'm pretty sure that is the F12 protocol and it can do either behavior with a control bit.

Make sure you have downloaded the latest version of IR AND DecodeIR.dll copied to the windows\system folder and it should decode.

If you have a problem just post it to the diagnosis section and I 'll take a look when you let me know it is there.
_________________
-Jon
Back to top
View user's profile Send private message Send e-mail Visit poster's website
DPE



Joined: 05 Oct 2003
Posts: 10
Location: Austin, Tx

                    
PostPosted: Sun Oct 05, 2003 9:10 pm    Post subject: Reply with quote

Jon,

That was it. Thanks alot!

-Dave
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Code Search (Closed) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control