JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

URC-39730 B00-00 Remote Pinout

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
drake008



Joined: 15 Apr 2016
Posts: 2

PostPosted: Fri Apr 15, 2016 1:24 pm    Post subject: URC-39730 B00-00 Remote Pinout Reply with quote

Hi there I'am new here and wanted to ask you some questions regarding my Dreambox DM7000S remotemodel URC-39730 B00-00

It seems that I deleted the settings so that I cannot switch channel and all the other features.

There is JP1 pinheader in the remote and I ordered an FTDI cable. I also got the IR software. Now I "just" need the programmdata for the remote for the DM7000S and hopefully you guys know the pinout of the pinheader.

It starts upper right with 1 and ends lower left with 6. Is it 1,2,3 in the upper row and 4,5,6 in the lower one or 1,3,5 upper and 2,4,6 lower?

Can I even flash my remote back to an useful state to get it back working with the Dreambox DM7000S? I read something about JP1 and JP 1.X. I hope I did ordered the correct cable.

I also have a cable which is recognized by WIndows XP as Prolific USB to Serial. It has only four outputs. TX,RX,VCC and GND. COuld this also be compatible?
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3769

PostPosted: Fri Apr 15, 2016 2:12 pm    Post subject: Reply with quote

I think both are the wrong cable for that remote. If I'm right, you'll need a JP1 EEPROM adapter for that FTDI cable (or your Prolific cable, assuming you can find RTS inside and add a wire for it). Pinout is linked in the "what cable..." sticky.

Since you've never used a cable before, you should be able to recover without one.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18512
Location: Chicago, IL

PostPosted: Fri Apr 15, 2016 5:33 pm    Post subject: Reply with quote

Assuming that your cable has the same color coding as the chip_partner cable that we recommend, the color coding is here:
http://www.hifi-remote.com/forums/viewtopic.php?t=16360

However, if Dave is correct that the Dreambox remote is really a JP1 remote, rather than a JP1.x remote, you will need the following EEPROM adapter:
http://www.diygadget.com/jp1-2-1-3-to-jp1-adapter.html
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
drake008



Joined: 15 Apr 2016
Posts: 2

PostPosted: Sat Apr 16, 2016 7:48 pm    Post subject: Reply with quote

Thank you for the clarification. I hope it is a newer one.

Is the PIN-out

135
246

or is it

123
456
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18512
Location: Chicago, IL

PostPosted: Sat Apr 16, 2016 8:52 pm    Post subject: Reply with quote

There's usually a line printed around the 6-pin where one corner is cut out to make it look like an old index card. That corner is pin 1, then the pinout is like this:

531
642
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
3FG
Expert


Joined: 19 May 2009
Posts: 3241

PostPosted: Sat Apr 16, 2016 10:02 pm    Post subject: Reply with quote

We have a RDF file for Dreambox Remote V3 URC-39730 B02 signature OUKAOUK1. Judging from that RDF file, your remote is clearly a JP1 remote, and an adapter is needed besides the FTDI serial cable to program this remote by computer.

May I ask why you want to continue with this very old remote? Here in the USA, we can buy cable remotes which are JP1.3 and therefore can be programmed via the FTDI cable for <$10. These generally have better capability than the Dreambox remote.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18512
Location: Chicago, IL

PostPosted: Sat Apr 16, 2016 10:13 pm    Post subject: Reply with quote

and we can get fancy shmancy color screen remotes that come with their own USB cable for under $16 !!!
http://www.ebay.com/itm/322044831124
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central