View previous topic :: View next topic |
Author |
Message |
JohnM
Joined: 24 Nov 2004 Posts: 14
|
Posted: Mon Apr 11, 2016 10:55 pm Post subject: Unknown protocol of learned keys |
|
|
Using RCRP05B I learned keys for MiniMX Android box. But I can't use learned keys directly since Both IR and RM are unable to decode the protocol and I'm using RCRP05B extender which removes the support for learned key. I read some of the information here about decoding/building protocol, but most of it is over my head. Is there a tutorial for someone just starting on new protocol stuff?
Learned IR file is http://hifi-remote.com/forums/dload.php?action=file&file_id=14022 if anyone is kind enough to help me out.
Also, is there any alternate to protocol builder, one that does not require Excel?
Thanks in advance for any help. |
|
Back to top |
|
|
JohnM
Joined: 24 Nov 2004 Posts: 14
|
Posted: Mon Apr 11, 2016 11:37 pm Post subject: |
|
|
Never mind. I made the same dump mistake I made couple of years ago. These cheap android boxes send the actual code only once as soon as you press the key, and then keep sending ditto. And while learning I pressed key on oem remote first then on jp1. So all jp1 remote got was those dittos and was unable to decode the signal.
Once I learned it again by pressing key on jp1 remote first and then on oem, IR decoded them properly as NEC1.
Millions of thanks to the very helpful community here. |
|
Back to top |
|
|
JohnM
Joined: 24 Nov 2004 Posts: 14
|
|
Back to top |
|
|
|