Page 1 of 1

Samsung 4K TV MODEL UN55JS7000FXZA

Posted: Tue Dec 22, 2015 6:19 pm
by Steven Kovacs
Subject: Samsung 4K TV MODEL UN55JS7000FXZA

Need discrete source codes for this TV. Does anyone know what specific device upgrade they would be found in? Thanks for the assist.

1. Device: Samsung 4K TV MODEL UN55JS7000FXZA
2. Type of device: TV
3. Year: 2015
4. JP1/UEI Remote model: ATLAS OCAP URC-1056 JP1.3 (Black)
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code?
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything
12. If you have a Nevo (or similar) remote, have you tried ez-rc.com? n/a

Posted: Tue Dec 22, 2015 6:46 pm
by The Robman
Are you saying that setup code DVD/1234 works your TV?

Posted: Tue Dec 22, 2015 7:13 pm
by mdavej
Existing codes for older models work fine, except HDMI4. But with your help, we can find that one.

My guess you tried one of our upgrades already that just happens to be that arbitrary setup code.

Posted: Tue Dec 22, 2015 10:08 pm
by Steven Kovacs
I found the discrete on, and discrete off. I have not tried any codes for source selects. I was just hoping I could save time from hunting and searching through so many device upgrades. If you don't know which singular specific device upgrade would contain discrete inputs, maybe you could suggest what upgrades might be the best to try.
Thanks for any and all help you can give me.
Steve

Posted: Tue Dec 22, 2015 11:27 pm
by The Robman
The main thing that we want to know, before we start, is which upgrade or which setup code are you currently using. You said you are using setup code DVD/1234, which doesn't make sense. Dave is suggesting that you might be using an upgrade that just happens to be called DVD/1234. If that is the case, the code number is irrelevant, we would need the URL of the file.

And btw, read your PMs.

Posted: Wed Dec 23, 2015 6:25 am
by pH7_jp1
This upgrade is for a recent Samsung (not 4K). It has a discrete for HDMI4 that works for my TV, so hopefully it will work for you too.

Posted: Wed Dec 23, 2015 8:34 am
by Steven Kovacs
I made an error when I entered setup code DVD/1234. I left that in from the cut and paste I did. It should not have been in there. Sorry my mistake.

Posted: Wed Dec 23, 2015 9:40 am
by The Robman
OK, so then the question is, are you able to control your TV at all using your Atlas remote? If so, which built in setup code are you using, or, if you're using an upgrade, which one?

The reason for the question is, we want to make sure that whatever discrete codes we give you are for the same basic code.