Request bin file for HTV Box (H.TV, H TV) (android tv box)

maxflijp · Post by **maxflijp** » Mon Dec 07, 2015 4:11 pm

Hey everybody! I'm searching for a remote custom file for HTV Box (H-TV, H TV) (android tv box).

Device: http://www.amazon.ca/HTV-Internet-Strea ... B00NO74H1O

Thanks!!!

alanrichey · Post by **alanrichey** » Wed Dec 09, 2015 2:58 am

Just to let you know you are not being ignored, I'm in hospital at the moment, but will look into this when I get back home.

Post by **vickyg2003** » Wed Dec 09, 2015 5:52 am

alanrichey wrote:Just to let you know you are not being ignored, I'm in hospital at the moment, but will look into this when I get back home.

Now that is what I call dedication!

I did try and help out, but I can't find H-TV as a manufacturer. I tried using Android as a manufacturer, but couldn't find H-TV as a model either.

I hope what ever puts you "in hospital" or as we Americans say "in the hospital" is not too serious. Take care!

alanrichey · Post by **alanrichey** » Wed Dec 09, 2015 9:19 am

Safely back home and reunited with my laptop

I struggled as well but did find a manufacturer called H.TV and they did a box called the H-TV2. And it uses the same codes (NEC1 128:255) as a lot of one-off boxes. (Such as the Erastar ER-3000, Prima PM-698, Coolstream ZEE, Iris 9600 HD, Zehnder DX 860e, HomeWorx HW-150PVR, Teac HDB-850, Echostar DSB 791 & OpenBox X3...)

So worth a try, it's uploaded at

http://www.hifi-remote.com/forums/dload ... e_id=13754

Al

maxflijp · Post by **maxflijp** » Wed Dec 09, 2015 4:32 pm

Alan thanks for your dedication!

I'm very grateful!! =)

I'll try this code and post a reply if work or not

Thanks!!!

maxflijp · Post by **maxflijp** » Wed Dec 09, 2015 4:42 pm

Alan !!!

Great great great!!!

Is working!!!!

I'm using H.TV

Thanks!!!

You're the man!

alanrichey · Post by **alanrichey** » Thu Dec 10, 2015 1:31 am

Good, and thanks for the quick feedback. Although it does show it is CRUCIAL to post the exact name of the box. By missing out the period you almost lost it.

cxc828829 · Post by **cxc828829** » Sun Dec 27, 2015 11:39 am

Hello Alan,

I installed your codes to my Slingbox Pro-HD to control a H.TV HTV3 box (a newer version than HTV2) and I encountered some issues. Hoping you can help me resolve.

The "power" button seems to be working. But other buttons appear to be received/interpreted twice by the HTV3 box, i.e. the box thinks the button has been pressed twice making navigation using the cursor buttons (up/down/left/right) a bit tricky. The "OK/Select" key is also behaving similarly.

Any help or pointers would be much appreciated.

alanrichey · Post by **alanrichey** » Sun Dec 27, 2015 2:11 pm

http://www.hifi-remote.com/forums/dload ... e_id=13806

cxc828829 · Post by **cxc828829** » Sun Dec 27, 2015 8:47 pm

We are amazing Alan !

Your new codes are working as expected now.

Thank YOU !

cxc828829 · Post by **cxc828829** » Sun Dec 27, 2015 8:51 pm

I obviously meant "YOU are amazing, Alan"

alanrichey · Post by **alanrichey** » Mon Dec 28, 2015 2:30 am

Actually the non-repeat changes were all provided by other people on this forum in the past so your thanks should really go to them. I am just the final link in the chain.

cxc828829 · Post by **cxc828829** » Mon Dec 28, 2015 6:08 am

Thank YOU to ALL for the IR codes !

Now I just have to figure out if there is a way to have the HTV3 box turn on the video output on both the HDMI (connect to my TV) and the composite outputs (connect to my sling). Right now I can only use one-at-a-time. This is what the HTV3 box does, by default, apparently.

Any sling-er out there figured this one out ?

Thanks in advance !

alanrichey · Post by **alanrichey** » Mon Dec 28, 2015 8:55 am

Wrong forum on 2 counts

1. Nothing to do with remotes, which is what this forum is about

2. Nothing to do with the Slingbox either.

You need to get onto an HTV forum.

bijon · Post by **bijon** » Tue Dec 29, 2015 11:22 pm

My H.TV box remote just died and I'm looking for a remote that can replace it. I'm very new to this, can someone guide me on how to load this bin file to a remote?

Also what remote would be able to accomplish this.

Thanks in advance.