Page 1 of 1

Rikomagic MK902 II miniPC Android

Posted: Mon Nov 09, 2015 2:50 pm
by SnowSurf
I need some help with the protocol of the IR functions of the miniPC Android that I use as mediacenter.
Learned function on GAME device are working, although sometimes I have to repeat the command and ocasionally the IR receiver get jammed. Learning was difficult, I needed to learn some functions up to five times to get it working.
Decoded functions with protocol NEC1x on MP3 device are not working.
https://www.hifi-remote.com/forums/dload ... e_id=13677

I've been trying to change frequency without success, but I'm not even sure if this could be the problem.

Thanks

Posted: Mon Nov 09, 2015 3:36 pm
by mdavej
Subdevice needs to be blank, not "0".

Posted: Tue Nov 10, 2015 7:37 am
by SnowSurf
Thanks for the quick answer. I'll try it later and let you know.

Posted: Tue Nov 10, 2015 1:58 pm
by SnowSurf
Thanks for your help, mdavej, it's working fine.

Posted: Tue Nov 10, 2015 2:48 pm
by The Robman
Don't forget to add your working upgrade to the file section, thanks.

Posted: Wed Nov 11, 2015 1:54 pm
by The Robman
I re-created the RM file myself and loaded it here:
https://www.hifi-remote.com/forums/dload ... e_id=13681