View previous topic :: View next topic |
Author |
Message |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21251 Location: Chicago, IL |
Posted: Mon Mar 23, 2020 9:43 pm Post subject: |
|
|
Yes, please do, but start a new thread for it.
And feel free to play around with the code builder tab that I created, see if you can use it to create a custom code and then see if it works. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
ylaviolette
Joined: 17 Feb 2009 Posts: 134
|
Posted: Mon Mar 23, 2020 9:53 pm Post subject: |
|
|
will surely do and report back, Thanks again for your assistance |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21251 Location: Chicago, IL |
|
Back to top |
|
|
ylaviolette
Joined: 17 Feb 2009 Posts: 134
|
Posted: Thu Aug 06, 2020 5:46 pm Post subject: |
|
|
Thank you Rob, I will extract a few samples for the other unit (Keeprite) and open another thread. All is good for the TCL you just uploaded. Thx |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21251 Location: Chicago, IL |
Posted: Thu Aug 06, 2020 6:18 pm Post subject: |
|
|
All is good, does that mean you got to test it already? If so, that was quick. Did you try creating some custom codes with the spreadsheet too? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Thu Aug 06, 2020 6:50 pm Post subject: |
|
|
Everything is working fine, it's great!
The modes are working too! |
|
Back to top |
|
|
ylaviolette
Joined: 17 Feb 2009 Posts: 134
|
Posted: Fri Aug 07, 2020 1:39 pm Post subject: |
|
|
Yes, rmdu works + custom codes
just a note for the TCL however :
FAN0=auto (vs off)
MODE TYPE 3 = cool (vs unit)
I uploaded a spreadsheet + associated ict for the Keeprite unit + new thread:
http://www.hifi-remote.com/forums/viewtopic.php?p=140488#140488
I've tried to make it as easy as possible to decode; let me know if you manage to extract the associated signals, patterns, pronto and upgrade.
On my end, only the pronto codes really matter but could be nice to accomplish the same thing (upgrade) for it as it seems to be following the same patterns.
Thanks again for your assistance on this, greatly appreciated. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21251 Location: Chicago, IL |
Posted: Fri Aug 07, 2020 4:10 pm Post subject: |
|
|
Thanks, I have updated the spreadsheet that generates the codes with your updates. Eventually, I hope to create an entry for RM which will let you enter all those variables in that tool.
I have merged your new Keeprite thread with the original thread on it. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
ylaviolette
Joined: 17 Feb 2009 Posts: 134
|
Posted: Fri Aug 07, 2020 4:35 pm Post subject: |
|
|
Quote: | , I have updated the spreadsheet that generates the codes with your updates. |
Thx Rob, I can locate the TCL spreadsheet that you built earlier this year but can't find anything "updated" vs the data I just uploaded (Keeprite )
Let me know if I am missing something, thx |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21251 Location: Chicago, IL |
Posted: Fri Aug 07, 2020 5:59 pm Post subject: |
|
|
This thread is just for TCL, I'm not posting anything here for the Keeprite.
I updated the spreadsheet that you used to create custom codes for the TCL based on the comments you made about unit vs. cool, etc.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26050 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Sun Aug 16, 2020 2:41 pm; edited 1 time in total |
|
Back to top |
|
|
ylaviolette
Joined: 17 Feb 2009 Posts: 134
|
Posted: Fri Aug 07, 2020 6:29 pm Post subject: |
|
|
Got it. Thanks, |
|
Back to top |
|
|
ylaviolette
Joined: 17 Feb 2009 Posts: 134
|
Posted: Wed Aug 12, 2020 4:07 pm Post subject: |
|
|
Thanks for the additional efforts on this;
will try to do some testing and get back to you; i am in the middle of a full home automation revamp so could take a few extra days cheers |
|
Back to top |
|
|
ylaviolette
Joined: 17 Feb 2009 Posts: 134
|
Posted: Fri Aug 14, 2020 1:55 pm Post subject: |
|
|
If this can help, only the following timer values are supported (with the unit I am using at least):
24h
23h
22h
21h
20h
19h
18h
17h
16h
15h
14h
13h
12h
11h
10h
9.5h
9h
8.5h
8h
7.5h
7h
6.5h
6h
5.5h
5h
4.5h
4h
3.5h
3h
2.5h
2h
1.5h
1h
0.5h |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21251 Location: Chicago, IL |
Posted: Sun Aug 16, 2020 2:38 pm Post subject: |
|
|
I have modified my executor to only use 3 variable bytes, and it increased the executor by just 23 bytes, so I think that's a good trade off. I have also created a protocols.ini entry for it that specifies the time as hours and minutes, and I'm showing the temp in both C and F.
RMDU file and protocols.ini entry are here:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26039
PB, KM and IR files used to build the executor are here:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26050
ylaviolette or Carl, could you please do some testing with the latest upgrade that I have posted. Once you've confirmed that the normal functions work, if you're up for doing some experimenting, I'd like to see if you can push the unit further via a JP1 upgrade than you can using the OEM remote.
For starters, when you set the timer, you're normally only allowed 1 hour increments above 10 hours, and half hour increments below. This upgrade allows you to do it in 10 minute increments, is there any way for you to tell if a timing setting such as 20 minutes, or 1 hour 20 minutes is actually accepted?
Next, the Mode function has a few undocumented options available, there's one before heat at the top of the list, and there are 3 more between cool and fan. These are just represented by a dash for now, but you can still select them. I don't expect them to do anything, but I am puzzled why they are even there, so I'd be curious to see what, if anything, they do.
Finally, the Fan function has an undocumented level between med and high, so I'd be curious to know if that's a real level and if so, is it really a mid-level setting between those two? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Mon Aug 24, 2020 7:04 pm Post subject: |
|
|
I may be able to test this wednesday. I'll let you know. |
|
Back to top |
|
|
|