JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

TMY HDR-ZS232E device upgrade

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Protocol Decodes
View previous topic :: View next topic  
Author Message
chuliu



Joined: 04 Dec 2010
Posts: 255
Location: Hong Kong

PostPosted: Sun Oct 25, 2015 12:05 am    Post subject: TMY HDR-ZS232E device upgrade Reply with quote

I have done the ict file for TMY HDR-ZS232E and it is a new protocol. Luckily, it was quite simple.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13643
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13642

With 1 byte of device byte and 3 bytes of command byte.
structure : device, command
1=(422,-844) 0=(422,-422)
lead in=(3360,1680)
lead out style=LI, LO
lead out off=74766

I created the rmdu file, which is reported to work.

Thanks.


Last edited by chuliu on Sun Oct 25, 2015 9:31 am; edited 2 times in total
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18103
Location: Chicago, IL

PostPosted: Sun Oct 25, 2015 8:50 am    Post subject: Reply with quote

It's actually 3 fixed bytes and 1 variable byte, but you got that right in the code. As this is NEC based, you should assume that all data is LSB whereas you had the command byte as LSB and the device bytes as MSB.

Also, you appear to have only included 1 function and the OBC is not one of the 5 OBCs that appear in your IRScope file

Here is a version with all 5 buttons programmed (though I suspect there are more) which uses LSB for all the data:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13646
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
chuliu



Joined: 04 Dec 2010
Posts: 255
Location: Hong Kong

PostPosted: Sun Oct 25, 2015 9:10 am    Post subject: Reply with quote

Sorry about the mistake.
I have only partial icp file.
Admittedly I used msb and lsb inconsistently.
I will upload a complete bin file now, which still has the msb and lsb issue.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13647
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Protocol Decodes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central