JP1 Remotes

ankinney · Joined: 01 Oct 2003 Posts: 3

Does anyone know where I might find an RDF file that is compatable with the URC-1057BG0 remote? This remote came with a Motorola DCT/5100 HDTV cable box from Comcast.
Thanks, Allan

The Robman · Posted: Thu Mar 04, 2004 8:22 am Post subject:

Does this remote communicate with IR.exe? Some of the new Comcast remotes are not JP1 compatible, even though they have a 6-pin connector.

If it does work with IR.exe, post the memory dump in the Diagnosis Area and I'll take a look at it.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

ankinney · Joined: 01 Oct 2003 Posts: 3

The remote does not communicate properly with IR.EXE. When I try to download from the remote I receive an error message:
"SDA is being held low. Make sure batteries are installed in the remote." ...they are.
Thank you, Allan

The Robman · Posted: Thu Mar 04, 2004 3:57 pm Post subject:

Does it say something like "JP1.1" near the 6-pin? I suspect that you have one of the new "Flash" chip remotes that are not JP1 compatible.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

ankinney · Joined: 01 Oct 2003 Posts: 3

Yup...it is labled "JP1.1"
Thanks for your assistance,
Allan