Page 1 of 1
CaptiveWorks Ultima
Posted: Mon Dec 08, 2014 10:03 pm
by EdT
1. Device: CaptiveWorks Ultima
2. Type of device: Satellite FTA Receiver
3. Year: 2009
4. JP1/UEI Remote model: RCRP05BR
5. Do you have a JP1 cable? On its way
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? N/A
11. Have you tried the JP1 Lookup Tool? Yes, model not listed
Posted: Mon Dec 08, 2014 11:04 pm
by mdavej
Probably uses the same codes as the 800:
https://www.hifi-remote.com/forums/dload ... le_id=5503
or TV code 1548 and the following EFCs:
Code: Select all
00247 0
00054 1
00182 2
00058 3
00119 4
00186 5
00123 6
00118 7
00183 8
00122 9
00229 vol up
00235 vol down
00059 mute
00055 power
00100 menu
00039 EPG / GUIDE
00230 up arrow
00102 down arrow
00235 left arrow
00229 right arrow
00231 select / OK
00104 Tv/Radio
00171 RED audio
00165 BLUE info
00167 GREEN
00169 YELLOW Zoom
00251 WHITE set
00166 F2 Sub
00168 F3 PIP
00164 txt XX
00037 Page up
00164 Page Dn
00041 FAV
00106 Exit
00234 Recall
00248 SAT XX
00170 F1 SLEEP
00228 F4
00233 USB
00246 Find >
00043 Sat <
00107 REW
00103 FWD
00105 Play
00036 REC
00040 Pause
00038 F.Rew
00042 F.Fwd
00101 Stop
00037 Page up
00164 Page down
If assigning to a device button other than TV, you'll have to change its device type first (see the manual).
Posted: Tue Dec 09, 2014 4:35 pm
by EdT
Thanks the 1548 code worked great, but I was unable to assign the CBL/SAT key as the second TV device mode, instead I used the DVR/AUX and that seem to have taken the re-assign.
Posted: Tue Dec 09, 2014 5:52 pm
by mdavej
CBL/SAT may be code locked. You can unlock per the wiki and try again if you want.
Posted: Tue Dec 09, 2014 9:39 pm
by EdT
I tried to unlock the CBL/SAT device mode with the 982 code
CBL/SAT—>SETUP—>9—>8—>2—>4 Blinks which shows it to be unlocked
Then tried to assign as TV mode to CBL/SAT mode
CBL/SAT—>SETUP—>9—>9—>2—>TV—>CBL/SAT single long blink no 2 blinks ...no cigar
Is there any reasons why the CaptiveWorks uses a TV code instead of a SAT code ? Anyways I assigned my Motorola DSR905 Sidecar to CBL/SAT with code 0869 and it took it on the first try.
Posted: Tue Dec 09, 2014 9:56 pm
by 3FG
How much longer until your cable arrives? I checked with my RCRP05B, and while it doesn't accept changing the CBL button type via 992, it works fine from RMIR.
A satellite receiver has a lot in common with a TV tuner. Probably the actual manufacturer also makes TVs.
Posted: Tue Dec 09, 2014 10:37 pm
by EdT
The cable won't be here for another 3 weeks most probably by the first week of the new year.
In your opinion what should I be using IR or RMIR ?
So in the mean time I can play around with the software to familiarize myself with it before the cable arrives..
Posted: Wed Dec 10, 2014 12:56 am
by 3FG
I think nearly everyone, certainly new users, can be more productive with RMIR. IR is a program which primarily uploads/downloads data to/from a remote, using data provided via cut and paste from RM or the Excel spreadsheet KM. RMIR combines the functionality of RM with the capability of uploading/downloading to/from a remote. Some veteran experts prefer IR; it has some features not found in RMIR, e.g. converting learned signals from UEI to Pronto format. But without a cable there really isn't much you could do with IR.
I use RMIR 99% of the time.