Page 1 of 1
JP 1.4
Posted: Mon Dec 08, 2014 10:18 am
by retired2golf
I have a URC 600 (remote for Shaw Direct DSR630 PVR) with a 6 pin connector in the battery compartment. Looking at it it's labeled JP 1.4. Is this compatible with any of the other JP builds?
Dave
Posted: Mon Dec 08, 2014 10:38 am
by 3FG
Not sure what you're asking, but let's check the signature of the remote. Use the
983 command. If it is a JP1.4 remote, the signature will start with a 3, and will have 5 digits. So check buttons 1 through 5 when following the 983 instructions.
If the remote doesn't have a Setup button, try holding the TV button until the remote blinks twice.
Example for 990 command, showing the use of the TV button instead of the Setup button.