JP1 Remotes

Hi, im doing this for a friend, Im looking for the bon codes for the sat. receiver Thomson DSI 150 also the codes are the same for the Thomson DSI122via, can anyone create a remote for one of those boxes?
Thanks in advance

I think you mean DSI 22via ?

Unfortunately these boxes use a Thomson-specific IR Protocol (no real surprise) that I have never managed to get to work. I'm not convinced the executor we have is correct although we have checked it a few times.

Anyway, give it a try: https://www.hifi-remote.com/forums/dload ... e_id=12907

Hi Alan!
Thank you for your swift reply! most of the options are working , they only issue and we were wondering if its possible to configure is the
"Menu" button as it seems that it doesn't work at all and the subtitles are available within the menu > can we do anything about this?
We thank you for your support!

And thanks for the swift feedback, makes a pleasant change. And it's great to find a working Thomson remote.

No quick answer on the Menu. I get the IR Codes off the Logitech Harmony IR Database and I have confirmed the code for the Menu function on both boxes is 62 and that is what I have programmed. Unless you have access to a Logitech Harmony of the right model, the option has to be trial and error. Not as daunting as it sounds if you want to give it a go ?

Hi Alan! Im getting little bit confused now what you mean by code 62 , by pressing 62 the menu should appear?

sakisson wrote:Hi Alan! Im getting little bit confused now what you mean by code 62 , by pressing 62 the menu should appear?

Sorry, butting in here. Code 62 refers to the code that is being sent by the button labeled "menu". You don't have to enter 62.

The Setup button in this upgrade is assigned Code 76. Other upgrades have that associated with the menu button. Try the setup button. Does it pull up the menu?

we found out that the custom11 corresponds to the full menu options and the custom12 to the teletext but no way to access the custom options on an slingplayer for Ipad...

in addition to my previous email , is it possible to re-map the functions for custom11 and custom12 to an existing button? maybe I ask too much ?

No it's easy: I've mapped them to the Page+/- buttons.

https://www.hifi-remote.com/forums/dload ... e_id=12907

And Vicky was right, it was the Setup function.

But you 'found' Custom 11 & 12 ? Surely you read the instructions ? That tells you that Custom 11 was setup and Custom 12 was teletext

Alan you are a star! the menu and teletext are working now!

Good, glad it's sorted