New version of BBTV

siulungchow · Post by **siulungchow** » Wed Nov 05, 2014 4:28 am

Hi,

Due to BBTV use new version of set top box (Motorola) , Previously version （
https://www.hifi-remote.com/forums/dload ... e_id=10393） is ok for use but remote button still different, how can I get new version ?

alanrichey · Post by **alanrichey** » Thu Nov 06, 2014 1:38 am

Not sure what you mean by 'remote button'. Can you explain ?

siulungchow · Post by **siulungchow** » Sun Nov 09, 2014 9:23 pm

new set top box remote control is different, add some function button , so when I connect to new set top box , IR connector not easy to use .

alanrichey · Post by **alanrichey** » Mon Nov 10, 2014 1:37 am

What is the new Model Number of the Motorola box ?

siulungchow · Post by **siulungchow** » Mon Nov 10, 2014 11:53 pm

Sir，

MOTOROLA model is HMC3000 。 here is PIC for remote control
https://dl.dropboxusercontent.com/u/421 ... .51.50.jpg

alanrichey · Post by **alanrichey** » Tue Nov 11, 2014 1:59 am

Are you sure ? The codes I get for the HMC3000 show it as a simple STB with no colour buttons or PVR buttons.

The remote for that version is at https://www.hifi-remote.com/forums/dload ... e_id=12906

If it works on the simple commands we can figure out the missing functions,

siulungchow · Post by **siulungchow** » Tue Nov 11, 2014 2:52 am

thanks for help。 en... we need use colour buttons due to some function need to use that, also , [multiple language ] button also need to use (On top of of home key)

alanrichey · Post by **alanrichey** » Tue Nov 11, 2014 3:37 am

I know, but I need to know if the remote I built works on the limited functions (Power, numbers, Channel...)

or do you know another remote that partially works ?

siulungchow · Post by **siulungchow** » Tue Nov 11, 2014 4:14 am

get it , I will try this version and feedback , thanks again !!

alanrichey · Post by **alanrichey** » Sat Nov 15, 2014 4:42 am

So what happened ?

siulungchow · Post by **siulungchow** » Sun Nov 16, 2014 6:19 am

sir .
I try this version. all function can not work

Previously version （
https://www.hifi-remote.com/forums/dload ... e_id=10393） is ok for power and number function

alanrichey · Post by **alanrichey** » Sun Nov 16, 2014 10:50 am

OK we can work with that.

Just to explain, now we have the IR Protocol and Device Numbers there are only 255 possible codes for the buttons. So at

https://www.hifi-remote.com/forums/dload ... e_id=12928

I have posted 3 sets of BIN files.

C2010 is the one we have that partially works. But please install that again and then tap EVERY button on the remote and see if any of them do anything (apart from power and numbers which we know are correct.)

C2011 has the Power button correct but the other buttons will send codes that so far we haven't tested. So tap EVERY button, including the 15 Custom buttons you get from right-clicking on the image and selecting Custom). So see if any of them do anything,

Then repeat the operation for C2012.

alanrichey · Post by **alanrichey** » Sat Nov 22, 2014 6:41 am

Are you not going to bother now ?

alanrichey · Post by **alanrichey** » Thu Nov 27, 2014 11:49 am

OK,I give up. Big waste of time all round.

siulungchow · Post by **siulungchow** » Sun Dec 14, 2014 6:20 am

hi

I try to download file from https://www.hifi-remote.com/forums/dload ... e_id=12928 but it does not exist, please help me check again , thanks !