JP1 Remotes

In case anyone else is looking to replace the tiny remote that comes with the Audioengine A5+ speakers...

NECx2 protocol
Device 0
Subdevice 253

OBC 1 = Power
OBC 3 = Mute
OBC 7 = Vol-
OBC 9 = Vol+

I added an .rmdu file here.

-Adrian

Thanks for your contribution. I wish everybody would submit there upgrades.

thanks

now I just need to understand how to convert these to pronto..

Download irscrutinizer and plug ih the values you find in this post

try these...

OBC 1 = Power
0000 006C 0000 0022 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0622

OBC 3 = Mute
0000 006C 0000 0022 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0622

OBC 7 = Vol-
0000 006C 0000 0022 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0622

OBC 9 = Vol+
0000 006C 0000 0022 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0622

thank you!
tried for a long time to make my cell phone be a remote, but the stupid program I used changed the codes being sent. once I removed this nice "feature" (Fix Buttons feature in IR Remote app by twinone) it started working.

on the way I also discovered web page https://irdb.globalcache.com/Home/Database which has codes also and was helpful with supplying the pulses instead of hex.

thanks again, learnt a lot from you.

You have to log in to see the globalcache.com page, so could you cut & paste whatever was relevant please.

Sure. I used the codes without the prefix of sendir .. starting with 38000 each time

function, code1, hexcode1, code2, hexcode2

"MUTE TOGGLE","sendir,1:1,1,38000,1,69,343,171,22,21,21,21,22,21,22,21,21,21,22,21,22,21,22,21,21,64,21,21,22,63,22, 63,22,63,22,63,22,63,22,63,22,63,22,63,22,21,22,21,21,21,22,21,22,21,21,21,22,21,22,21,22, 63,22,63,22,63,21,64,21,64,21,64,21,1570,342,85,21,3653 "," 0000 006D 0022 0002 0157 00AB 0016 0015 0015 0015 0016 0015 0016 0015 0015 0015 0016 0015 0016 0015 0016 0015 0015 0040 0015 0015 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0015 0016 0015 0015 0015 0016 0015 0016 0015 0015 0015 0016 0015 0016 0015 0016 003F 0016 003F 0016 003F 0015 0040 0015 0040 0015 0040 0015 0622 0156 0055 0015 0E45",,

"SLEEP","sendir,1:1,1,38000,1,69,343,171,21,22,21,21,22,21,22,21,21,21,22,21,22,21,21,21,22,63,22,21,22,63,22,63,22, 63,22,63,22,63,22,63,22,63,22,21,21,22,21,21,22,21,22,21,21,21,22,21,22,21,21,64,21,64,21, 64,21,64,21,64,21,64,21,64,21,1571,342,85,22,1571 "," 0000 006D 0022 0002 0157 00AB 0015 0016 0015 0015 0016 0015 0016 0015 0015 0015 0016 0015 0016 0015 0015 0015 0016 003F 0016 0015 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0015 0015 0016 0015 0015 0016 0015 0016 0015 0015 0015 0016 0015 0016 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0623 0156 0055 0016 0623",,

"VOLUME DOWN","sendir,1:1,1,38000,1,69,342,171,22,21,22,21,21,21,22,21,22,21,21,21,22,21,22,21,21,64,21,21,22,63,22, 63,22,63,22,63,22,63,22,63,22,63,22,63,22,63,22,21,22,21,21,22,21,21,22,21,22,21,21,21,22, 21,22,63,22,63,22,63,22,63,22,63,22,1570,342,85,22,3655 "," 0000 006D 0022 0002 0156 00AB 0016 0015 0016 0015 0015 0015 0016 0015 0016 0015 0015 0015 0016 0015 0016 0015 0015 0040 0015 0015 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0015 0016 0015 0015 0016 0015 0015 0016 0015 0016 0015 0015 0015 0016 0015 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0622 0156 0055 0016 0E47",,

"VOLUME UP","sendir,1:1,1,38000,1,69,343,171,21,21,22,21,22,21,21,22,21,21,22,21,22,21,21,21,22,63,22,21,22,63,22,63,22, 63,22,63,22,63,22,63,22,63,22,21,21,21,22,63,22,21,22,21,21,22,21,21,22,21,22,63,22,63, 22,21,21,64,21,64,21,64,21,64,21,1573,342,85,21,3658 "," 0000 006D 0022 0002 0157 00AB 0015 0015 0016 0015 0016 0015 0015 0016 0015 0015 0016 0015 0016 0015 0015 0015 0016 003F 0016 0015 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0015 0015 0015 0016 003F 0016 0015 0016 0015 0015 0016 0015 0015 0016 0015 0016 003F 0016 003F 0016 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0625 0156 0055 0015 0E4A",,

How can I program these into an IR remote program on my Android?

spucci278 wrote:How can I program these into an IR remote program on my Android?

Your question is too vague. There are lots of IR Apps, each has its own method.

If we make the assumption that you don't care about which app you use, get irplus. It can be programmed by exporting the IR signals from IrScrutinizer.

My original AudioEngine remote has died

Can someone who understands this topic more than me tell me:

- if the codes are known (which they are) do they match any more widely used codes that I might find preprogrammed in a universal remote?

It doesn't look like AudioEngine sell their own remotes separately.

Thanks in advance,

Neil

They do not. You would need a JP1 remote or some other that could load pronto hex. In the US, JP1 remotes with cables start around $12.

EDIT: Actually, I found one European One for all (URC-7555) that could be made to work using built in code TV 1988 plus some manual programming. If you're not in Europe, some other JP1 remote withcable would still be cheaper and easier.

Thanks very much - really helpful.

I guess I need to go down the rabbit hole and understand JP1. Looks like fun

Neil