JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

URC-6430 power button with CombiControl

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Non-JP1
View previous topic :: View next topic  
Author Message
Tolaris



Joined: 14 Sep 2014
Posts: 3

PostPosted: Sun Sep 14, 2014 2:43 pm    Post subject: URC-6430 power button with CombiControl Reply with quote

I got a bit off-topic on the forum.flirc.tv. Perhaps you can better help me?

http://forum.flirc.tv/index.php?/topic/1319-code-to-use-with-flirc-and-urc6430

I have a URC-6430 which I'm using to control a Panasonic TV (on the TV button) and a Flirc+XBMC+Linux PC device (on "PVR" button). I use CombiControl in "watch TV" mode most of the time. I'd like the Power button in this mode to send power to the TV, not both devices, and for holding the button to continue sending the signal. Is this possible?
Back to top
View user's profile Send private message Visit poster's website
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3657

PostPosted: Sun Sep 14, 2014 4:16 pm    Post subject: Reply with quote

Removing devices from master power is detailed in the manual. Alternately, just use our Remote Master software and uncheck the box for the devices to omit.

There is no way to extend duration yet unless you want to do a custom protocol with RM.
Back to top
View user's profile Send private message
Tolaris



Joined: 14 Sep 2014
Posts: 3

PostPosted: Wed Sep 17, 2014 9:55 am    Post subject: Reply with quote

mdavej wrote:
Removing devices from master power is detailed in the manual.


Thanks for the help. Which manual? The URC-6430 manual does not detail this as far as I can see.
Back to top
View user's profile Send private message Visit poster's website
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3657

PostPosted: Wed Sep 17, 2014 10:57 am    Post subject: Reply with quote

Try the procedure on page 8 of the 6440 manual:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12385

I don't know if it will actually work on a 6430. If not, you can do it in Remote Master.

Otherwise, just press TV then Power then Watch TV to power on. To power off, press TV then Power. Besides the power macro, all Watch TV does is assign different groups of keys to different devices.
Back to top
View user's profile Send private message
yaworski



Joined: 22 Jun 2014
Posts: 348
Location: Warsaw, Poland

PostPosted: Wed Sep 17, 2014 11:03 am    Post subject: Reply with quote

Hi Tolaris,

Enter setup mode, select Combi Control button you want to change (Watch TV or Watch Movie), press device button you want to exclude (or include if already excluded), press power button.

After pressing power the selected device button will blink two times if the device is excluded or four times it's included in the macro.
Back to top
View user's profile Send private message
Tolaris



Joined: 14 Sep 2014
Posts: 3

PostPosted: Wed Sep 17, 2014 5:03 pm    Post subject: Reply with quote

Thanks all. That sorted it.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Non-JP1 All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central