Page 1 of 1
EFCs for Extron DVS-204 (RCA RCRP05BR)
Posted: Wed Aug 20, 2014 10:49 pm
by arablizzard2413
1. Device:
Extron DVS-204 (uses
IR 901 remote)
2. Type of device: Four input video scaler
3. Year: 2002
4. JP1/UEI Remote model: RCA RCRP05BR
5. Do you have a JP1 cable? No
6. Still have original remote? No, can't find remote for sale
7. Checked the file section? No
8. Checked Pronto file section (at R/C)? Yes,
ext-vid-dvs204.zip
9. Partially working setup code? Unknown
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, brand not present
Extron also has an
IR Remote Control Hex Code and Signal Timing Guide. I don't have a JP1 cable, so EFC codes are preferred if possible. Thank you!
Posted: Wed Aug 20, 2014 11:50 pm
by 3FG
Thanks for including such a complete set of information. This IR protocol is NEC1, device 0. You can use any NEC1, device 0 setup code. Find those using the Lookup Tool linked at the top of this page. I'd probably start with cable 2301, since most of the functions are already programmed into the remote-- but probably not to the buttons you'd like. Audio 1257, TV 0846, and Video 0719 will all work, and so will a lot of other setup codes. Here's the EFCs labeled with the button numbers shown in the IR Remote Control link:
Code: Select all
1 00181
2 00185
3 00183
4 00187
5 00180
6 00184
7 00182
8 00186
9 00053
10 00057
11 00055
12 00059
13 00052
14 00056
15 00054
16 00058
17 00117
18 00121
19 00119
20 00123
21 00116
22 00120
23 00118
24 00122
25 00245
26 00249
27 00247
28 00251
29 00244
30 00248
31 00246
32 00250
33 00165
34 00169
35 00167
36 00171
37 00164
38 00168
39 00166
40 00170
41 00037
42 00041
43 00039
44 00043
45 00036
Edited to remove an incorrect statement regarding bit order.
Posted: Thu Aug 21, 2014 1:54 am
by arablizzard2413
Thank you for the amazingly fast response, that's awesome!
For reference I used Video 0719 and the codes corresponding to this device:
Code: Select all
Preset 1 00181
Preset 2 00185
Preset 3 00183
Freeze 00186
Input 1 00057
Input 2 00055
Input 3 00059
Input 4 00052
Vertical + 00121
Vertical - 00119
Horizontal + 00123
Horizontal - 00116
Center Up 00122
Center Down 00250
Center Left 00247
Center Right 00244
Color - 00169
Color + 00167
Brightness - 00168
Brightness + 00166
Detail - 00041
Detail + 00039
Tint - 00171
Tint + 00164
Contrast - 00170
Contrast + 00037
I didn't notice any difference with the Freeze button, so maybe it's button 9 instead of 8, I'll have to test it.
Posted: Thu Aug 21, 2014 1:16 pm
by The Robman
Here are some additional codes that you can try:
Code: Select all
00187 Up Arrow
00180 Down Arrow
00184 Up Arrow
00182 Down Arrow
00054 Input Up
00117 Input ?
00123 Input Right
00118 Input Down
00043 Image Adjustment ?
00036 Image Adjustment ?
Posted: Thu Aug 21, 2014 7:50 pm
by arablizzard2413
Where did those codes come from?
The DVS-204 manual says buttons 00054 (button 15, "Input 6" on IR 901), 00117 (button 17, "Take"), 00043 (44, "Sharpness -"), and 00036 (45, "Sharpness +") are non functional. 00123 (button 20) is already listed above as Horizontal +.
Posted: Fri Aug 22, 2014 3:52 pm
by The Robman
I got them from the
Pronto file that you posted earlier. i compared the codes in there to the ones that you found. I guessed that input5 and input6 wouldn't do anything, but I figured these other ones were worth a try.