Page 1 of 1
Code needed for remote Control Humax R-836
Posted: Tue Jul 15, 2014 1:23 am
by Joerg
Hello,
I bought a new sling box Pro HD but there is no code for the Remote control from Humax HDCable Receiver with HD from Kabel-BW the German second Cable operator. I contacted slingsupport and they advised that might be somebody can provide here a binary code, which afterwards I can forward to slingbox support.
Thanks and best regards
Joerg
Posted: Tue Jul 15, 2014 10:04 am
by alanrichey
This is a pretty standard box, had you tried any other Humax devices ? The Humax IR-FOX C in the download section should work OK.
And why should we forward this to the Support section ? If they are too lazy to do the research themselves (this took me 3 minutes to check) I don't see why we should help them. Although you could offer to give them the information for $30, as that is what they would have charged you
Kabel-BW
Posted: Wed Jul 16, 2014 4:51 am
by Joerg
Thanks a lot for your answer, Yes I tried a lot of HUMAX (around 15) and none of them work....and I connected all 3 IRs to the Receiver front section. So when I will come home I will try this one also to be sure but I believe I tested it already...
Posted: Wed Jul 16, 2014 5:08 am
by alanrichey
Make sure you do all the tests in the Readme file as well.
Posted: Wed Jul 16, 2014 9:34 am
by Joerg
Sorry to ask as I am not that experienced.. which readout are you referring to?
Posted: Wed Jul 16, 2014 10:17 am
by alanrichey
The README file in the ZIP archive (The clue is in the title
)
https://www.hifi-remote.com/forums/dload ... le_id=9745
Posted: Fri Jul 18, 2014 11:56 am
by Joerg
Hi thanks for providing me the file. Just yesterday i started my holiday and i will come back after holiday.
Posted: Fri Jul 18, 2014 12:20 pm
by alanrichey
No reason why you can't install it while you are away on holiday