JP1 Remotes

hello people I come here a last attempt to retrieve my old man urc7550 B01.
Well basically it does nothing when I hit a key the only thing it does is light the led tv 2 times when I insert batteries.

the only thing I saw that he was doing the flashing light on and off when the unit was alone for a long time and kind when you switch to another device past a bit does the same, he must have been crazy.

already tried it for a week without batteries and various types of batteries and I've seen do not have any button stuck. did 3 upgrades for a lg tv and cassette player and a media center for imon.pad.
I have Windows 7 32bit and IR803 RM2.02
parallel cable diy that was a bummer to be working
but it works and I can make downloads and uploads.
Here's a link to the original file had problems, but now with the updates it got worse.

https://www.hifi-remote.com/forums/dload ... e_id=12425

Does he have a chance?
Can help me.

I think this worst I've been playing here and now neither the lcd shows the hours and the clock buttons do nothing.
thing that worked so far

I think I'll stop

can someone show me the right way

I made a new image with the new RemoteMaster v2.02a for my device with the upgrades that I stated.
but he did not pass it.

I'll put here the file.


https://www.hifi-remote.com/forums/dload ... e_id=12428

What language are you translating from?
I got something about your dad being crazy but haven't been able to follow much about what you are talking about.

It does sound like your batteries are nearly dead.

Im sorry for my English.
the batteries are new already tried everything I think it is hardware problem.


Thanks

I think the batteries need to be tested. Everything you said, sounds like bad batteries, new or not. Check them.

If they test okay, you can do a manufacturers reset.
Test the batteries first

i have Duracel bateries with Powercheck and they are fine. Also have rechargeable bateries and are ok.

I do not know ... more

Don't make a new image in RM. Reset remote first, then download into RM and start adding your upgrades, keymoves and macros to that.

Realize also that your remote is 15 years old. So it may be time for a new one.

15 years did not know ... yes already bought a new OFA8620 and is very cool.

Tell me the reset that you are talking is the 981 if yes I do not know any other.

Yes, 981.

was what I was imagining, but as already said before my keypad does not work
the only thing it does is light up twice when I insert batteries

and can do uploads and downloads by jp1.

If its like other Producer 8's remote, it used come down with scrambled keypad, this was Rob's remedy:

http://www.hifi-remote.com/manuals/p8/o ... service-ap

I think not ... should be more silly mine when i messes in iR some option or else it is a hardware problem.


Can anyone find an image for this handset with EBV0EBV1 signature.


thanks to all

Hi I noticed something on the battery cover have the reference of the device but also has some numbers that liked to be clarified and then is so.

URC-7550 B01
CFCC_____DC


Question these numbers are needed to make clean image.


Thanks

hello is just to say that the device works again.

It was only a bad firmware

Thanks to all