JP1 Remotes

hey there

i recently set up the tv star box model t1030 box with slingbox but tv star is not on the list of devices.i need the bin file.

please help!!!!

Couldn't find this device but did find the T1000. Hopefully it uses the same codes.

https://www.hifi-remote.com/forums/dload ... e_id=12403

Any good ?

thanks

but it didnt work ((

Please read the instructions in full and then report back.

what device do i choose from list

As covered in the instructions Basically PVR, Satellite or Cable. PVR is the usual one.

i tried and nothing.

unless u wanna have a go at it.

PLEASE read the instructions properly. It specifically asks you to send replies to a number of questions. I didn't do that for fun, they are ESSENTIAL things I need to know before I can help.

i took my time and followed the instructions.the second file kept giving me error message.i sent you privately my login info to slingbox and maybe u can give it a try.im new to this

I DESPAIR. Why is it so difficult to just do as I ask and answer the questions ? Here they are repeated, I CANNOT do anything else until you answer them.

1. What model Slingbox do you have?

2. Was there any error message after you typed in the Code and tapped the Test button ?

3. Did you give the commands plenty of time to react ? (I have a DVR that takes about 6-8 seconds to power up/down)

4. If you are using a Solo did you try both BIN files ?

5. After completing the setup do any of the buttons work ?

6. If you are installing on a Solo or Pro-HD or older box, have you used a Digital Camera to confirm the IR Blaster is actually firing when you tap the Power button ? (Watch the tip of the IR Blaster thorugh the viewfinder while you tap a button. You should see a white (not red) flash). If you are using a 350/500 have you tried using the external blaster ?

7. Have you experimented with the placement of the IR Blaster ? On some devices this is critical so don't give up too quickly.

8. Are you sure the device is working correctly using the real remote ?

1. What model Slingbox do you have?Solo

2. Was there any error message after you typed in the Code and tapped the Test button ?the second bin file gives me error in all devices

3. Did you give the commands plenty of time to react ? (I have a DVR that takes about 6-8 seconds to power up/down)yes i counted to 30 for every button

4. If you are using a Solo did you try both BIN files ?i used both files but the second one gives me error

5. After completing the setup do any of the buttons work ?none

6. If you are installing on a Solo or Pro-HD or older box, have you used a Digital Camera to confirm the IR Blaster is actually firing when you tap the Power button ? (Watch the tip of the IR Blaster thorugh the viewfinder while you tap a button. You should see a white (not red) flash). If you are using a 350/500 have you tried using the external blaster ?ir blaster is fine

7. Have you experimented with the placement of the IR Blaster ?yes and still nothing

8. Are you sure the device is working correctly using the real remote ?yes

At last. Thanks. But I have tried as well and get no reaction, so I guess the T1030 uses different codes to the T1000. Unless you can get the manufacturer to tell you the codes, or you have access to a lOITECH Harmony Remote there is nothing else I can do I'm afraid.

hey alan

looks like the brand "xoro 7515" looks the same as the tv star t1030.would u have the bin file for xoro 7515 and i could try and see if it works

This is a pretty standard box, I have about 15 Custom Remotes using the same codes. Before i build one for you just test out this one https://www.hifi-remote.com/forums/dload ... e_id=11185

Not all the buttons will work but it will at least show id we are on the right track.

nope it didnt work.
how come everytime i use the rv bin file it keeps telling me invalid bin?