JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

bin file for tv star t1030 terrestial box
Goto page 1, 2  Next
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Slingbox
View previous topic :: View next topic  
Author Message
mikeorfao



Joined: 02 Mar 2014
Posts: 34

PostPosted: Sun Mar 02, 2014 12:57 am    Post subject: bin file for tv star t1030 terrestial box Reply with quote

hey there

i recently set up the tv star box model t1030 box with slingbox but tv star is not on the list of devices.i need the bin file.

please help!!!!
Back to top
View user's profile Send private message Send e-mail
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3486
Location: UK/USA

PostPosted: Sun Mar 02, 2014 5:35 am    Post subject: Reply with quote

Couldn't find this device but did find the T1000. Hopefully it uses the same codes.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12403

Any good ?
Back to top
View user's profile Send private message
mikeorfao



Joined: 02 Mar 2014
Posts: 34

PostPosted: Sun Mar 02, 2014 5:56 am    Post subject: Reply with quote

thanks

but it didnt work Sad((
Back to top
View user's profile Send private message Send e-mail
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3486
Location: UK/USA

PostPosted: Sun Mar 02, 2014 6:18 am    Post subject: Reply with quote

Please read the instructions in full and then report back.
Back to top
View user's profile Send private message
mikeorfao



Joined: 02 Mar 2014
Posts: 34

PostPosted: Sun Mar 02, 2014 6:36 am    Post subject: Reply with quote

what device do i choose from list
Back to top
View user's profile Send private message Send e-mail
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3486
Location: UK/USA

PostPosted: Sun Mar 02, 2014 6:51 am    Post subject: Reply with quote

As covered in the instructions Very Happy Basically PVR, Satellite or Cable. PVR is the usual one.
Back to top
View user's profile Send private message
mikeorfao



Joined: 02 Mar 2014
Posts: 34

PostPosted: Sun Mar 02, 2014 7:07 am    Post subject: Reply with quote

i tried and nothing.

unless u wanna have a go at it.
Back to top
View user's profile Send private message Send e-mail
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3486
Location: UK/USA

PostPosted: Sun Mar 02, 2014 7:22 am    Post subject: Reply with quote

PLEASE read the instructions properly. It specifically asks you to send replies to a number of questions. I didn't do that for fun, they are ESSENTIAL things I need to know before I can help.
Back to top
View user's profile Send private message
mikeorfao



Joined: 02 Mar 2014
Posts: 34

PostPosted: Sun Mar 02, 2014 7:29 am    Post subject: Reply with quote

i took my time and followed the instructions.the second file kept giving me error message.i sent you privately my login info to slingbox and maybe u can give it a try.im new to this
Back to top
View user's profile Send private message Send e-mail
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3486
Location: UK/USA

PostPosted: Sun Mar 02, 2014 7:43 am    Post subject: Reply with quote

I DESPAIR. Why is it so difficult to just do as I ask and answer the questions ? Here they are repeated, I CANNOT do anything else until you answer them.

1. What model Slingbox do you have?

2. Was there any error message after you typed in the Code and tapped the Test button ?

3. Did you give the commands plenty of time to react ? (I have a DVR that takes about 6-8 seconds to power up/down)

4. If you are using a Solo did you try both BIN files ?

5. After completing the setup do any of the buttons work ?

6. If you are installing on a Solo or Pro-HD or older box, have you used a Digital Camera to confirm the IR Blaster is actually firing when you tap the Power button ? (Watch the tip of the IR Blaster thorugh the viewfinder while you tap a button. You should see a white (not red) flash). If you are using a 350/500 have you tried using the external blaster ?

7. Have you experimented with the placement of the IR Blaster ? On some devices this is critical so don't give up too quickly.

8. Are you sure the device is working correctly using the real remote ?
Back to top
View user's profile Send private message
mikeorfao



Joined: 02 Mar 2014
Posts: 34

PostPosted: Sun Mar 02, 2014 7:59 am    Post subject: Reply with quote

1. What model Slingbox do you have?Solo

2. Was there any error message after you typed in the Code and tapped the Test button ?the second bin file gives me error in all devices

3. Did you give the commands plenty of time to react ? (I have a DVR that takes about 6-8 seconds to power up/down)yes i counted to 30 for every button

4. If you are using a Solo did you try both BIN files ?i used both files but the second one gives me error

5. After completing the setup do any of the buttons work ?none

6. If you are installing on a Solo or Pro-HD or older box, have you used a Digital Camera to confirm the IR Blaster is actually firing when you tap the Power button ? (Watch the tip of the IR Blaster thorugh the viewfinder while you tap a button. You should see a white (not red) flash). If you are using a 350/500 have you tried using the external blaster ?ir blaster is fine

7. Have you experimented with the placement of the IR Blaster ?yes and still nothing

8. Are you sure the device is working correctly using the real remote ?yes
Back to top
View user's profile Send private message Send e-mail
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3486
Location: UK/USA

PostPosted: Sun Mar 02, 2014 8:24 am    Post subject: Reply with quote

At last. Thanks. But I have tried as well and get no reaction, so I guess the T1030 uses different codes to the T1000. Unless you can get the manufacturer to tell you the codes, or you have access to a lOITECH Harmony Remote there is nothing else I can do I'm afraid.
Back to top
View user's profile Send private message
mikeorfao



Joined: 02 Mar 2014
Posts: 34

PostPosted: Tue Mar 04, 2014 8:28 pm    Post subject: Reply with quote

hey alan

looks like the brand "xoro 7515" looks the same as the tv star t1030.would u have the bin file for xoro 7515 and i could try and see if it works
Back to top
View user's profile Send private message Send e-mail
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3486
Location: UK/USA

PostPosted: Wed Mar 05, 2014 2:35 am    Post subject: Reply with quote

This is a pretty standard box, I have about 15 Custom Remotes using the same codes. Before i build one for you just test out this one http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11185

Not all the buttons will work but it will at least show id we are on the right track.
Back to top
View user's profile Send private message
mikeorfao



Joined: 02 Mar 2014
Posts: 34

PostPosted: Wed Mar 05, 2014 2:53 am    Post subject: Reply with quote

nope it didnt work. Sad
how come everytime i use the rv bin file it keeps telling me invalid bin?
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Slingbox All times are GMT - 5 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central