View previous topic :: View next topic |
Author |
Message |
psron
Joined: 14 Nov 2009 Posts: 4 Location: near Kansas City, MO |
Posted: Sat Nov 14, 2009 4:52 pm Post subject: Comcast JP1.3 DVR remote needs Samsung BD-P1500/1600 codes |
|
|
I have the silver Comcast 3-device DVR remote with Red OK/Select button. (it says its a JP1.3 remote)
I have 2 Samsung Blu-Ray players - BD-P1500 and BD-P1600
On the BD-P1500, the code 20199 will operate some functions, like 4-way - but not the OK/Select... so I can't really do anything but move around in the disc menu.
I'd also like to have codes for the player setup menu |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3371
|
Posted: Sat Nov 14, 2009 5:27 pm Post subject: |
|
|
The OK/Select button is being hijacked by the Channel Lock capability. So when you push OK, notice that the cable device button blinks--that means the the OK signal appropriate to the cable box is actually being sent. The Comcast instructions say that Channel Lock doesn't affect the AUX mode, but if fact it does with these remotes. The CH+/- and digit keys are also Channel Locked.
You can get around this by turning off Channel Lock, but that also affects the TV mode, and you may not want that. A second way is to use keymoves to assign the function of you rchoice to any key. So, assuming that you have 20199 setup on AUX, and you are in AUX mode:
Press setup until it blinks twice.
Enter 994
press setup briefly
enter 00211
press Setup/OK
You should be rewarded with two blinks, meaning that the 211 code was accepted.
Here's a list of codes, compiled by mdavej and available here in the File Section. Prepend 00 to every code.
Code: |
0 140
1 016
2 012
3 019
4 015
5 017
6 013
7 146
8 142
9 144
scene search 147
cancel 205
title menu 242
slow forward 082
slow reverse 141
power 018
disc menu 207
menu 081
display/info 209
return 077
up arrow 210
down arrow 206
left arrow 204
right arrow 208
select 211
marker 110
input select 145
repeat 237
play 083
zoom 112
rewind 080
fast fwd 079
stop 076
open/close 014
f.fwd/next track 078
f.rew/prev track 143
subtitle 241
audio 239
repeat a-b 114
A 238
B 240
C 236
D 243
bonus view 044
pause 048
exit 108
|
|
|
Back to top |
|
|
psron
Joined: 14 Nov 2009 Posts: 4 Location: near Kansas City, MO |
Posted: Sun Nov 15, 2009 1:02 am Post subject: |
|
|
AWESOME! WORKS PERFECT - AND FAST!
YOU GUYS MUST THRIVE ON HELPING PEOPLE!
That was about 30 minutes - request to answer!
THANKS!!
|
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3371
|
Posted: Sun Nov 15, 2009 1:44 am Post subject: |
|
|
Great! Now, what about the 1600? It's new and we don't seem to have any information about the IR codes. Does it also respond to 20199 on any keys? Or perhaps responds to all of the same keys? Do you see a way to set up the 1600 so that it uses a different set of function codes-- something like IR channels A and B? |
|
Back to top |
|
|
ski2xs
Joined: 28 Nov 2009 Posts: 2
|
Posted: Sat Nov 28, 2009 2:29 am Post subject: Need more guidance on programming the keys |
|
|
The info on this site is awesome. Thank you! I am so glad I found it. I just bought the Samsung BD-P1600 too and trying to program my Comcast 3 in 1 with On Demand Remote. So far the steps up to the File section box with the codes have worked. So to answer 3FG's question, the 20199 code works.
But I wasn't sure what to do after that. You say Prepend 00 to the codes. I am new at this stuff, so I could use more detailed instructions from this point on. I wasn't sure if I should type in the number in the left hand column followed by 00 and then the code on the right and just keep going in that manner. Do I need to press set up for every step? I appreciate any further info from the step where the 211 code is accepted. Thanks again. You guys are genuises! |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3371
|
Posted: Sat Nov 28, 2009 3:03 am Post subject: |
|
|
You don't necessarily need to do anything. The 3 digit EFC codes listed above are very similar to the EFCs in 20199--identical for digit keys, arrow keys, etc. So first try every function you want and see if it already works.
Now, suppose you want to use the function "title menu". The Comcast remote doesn't have a button labeled "title menu". So is there a Comcast button that will bring up the title menu? You can figure that out by looking above to see that the EFC for "title search" is 242 (00242 on your remote). Next use the Lookup Tool (link at the top of this page) and choose Device Search, select Video, and enter setup id 0199 (drop the leading 2. The Comcast remote recognizes the leading 2 to mean video, but lots of other remotes accept only the last 4 digits.) Choose Comcast 1067BX3, and click Search.
Now click on the EFCs link at the right of the page. That gives you a list of button names and EFCs. You'll see that EFC 242 is assigned to Guide in 0199. So, using 20199 in the Comcast remote, press Guide to bring up the title menu.
If you want a function which is not listed in the Lookup Tool, or you would like to assign it to a different button, use the 994 procedure above. Just remember to change the 3 digit EFCs into 5 digits by typing 00 just before the 3 digits. Replace 00211 with the desired EFC, and instead of pressing OK/Select, press the key you want to assign the EFC to.
Do all 5 steps for each key to be assigned. |
|
Back to top |
|
|
ski2xs
Joined: 28 Nov 2009 Posts: 2
|
Posted: Sat Nov 28, 2009 10:44 am Post subject: Thank you! |
|
|
Wow, I am impressed with the speed of the response and the details. Now I get it. Thank you! |
|
Back to top |
|
|
clanxymox
Joined: 21 Jun 2013 Posts: 1
|
Posted: Fri Jun 21, 2013 6:54 am Post subject: |
|
|
Thank you for the codes listed above. FYI - The codes listed will also work for a Samsung BD-D5500 BlueRay player.
However the TOOLS button is not on the list. I'm not sure if the Samsung PD-1500/1600 have a TOOLS button on that remote.
However I need the code for the TOOLS button for the Samsung BD-5500 Blueray player in order to delete/remove downloaded apps from Samsung Smarthub. Please see example below. Missing the 00xxx code for the TOOLS button. Your assistance is greatly appreciated. Thank you folks setting up this wonderful forum.
Press setup until it blinks twice.
Enter 994
press setup briefly
enter 00xxx
press TOOLS Button |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Jun 21, 2013 8:11 am Post subject: |
|
|
I didn't see these functions in the above list.
178 internet
174 fullscreen
176 tools
177 netflix _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
rickgtx
Joined: 27 Jul 2007 Posts: 35
|
Posted: Sun Feb 23, 2014 11:13 am Post subject: Slow foward resets BD-D5500 |
|
|
Just a word of caution to any Samsung BD-D5500 Blu-Ray owners. The slow foward resets the Blu-Ray player settings. You need re-download your apps, redo netflix signon, and redo any special language or video setup.
The AK59-00123A remote does not have a slow button, but I added the commands anyway to my URC-8910. The slow forward command resets the Blu-Ray plaer immediately - no chance to stop it. I tried twice.
Good news is you can add the 178 internet, 174 fullscreen, 176 tools, and 177 netflix to get those functions. |
|
Back to top |
|
|
|