Page 1 of 2
Panasonic VT60 Series Television (codes for Apps + Home)
Posted: Tue Feb 11, 2014 6:30 am
by hashtag
1. Device: Panasonic VT60 Series (TC-P55VT60)
2. Type of device: TV
3. Year: 2013
4. JP1/UEI Remote model: Comcast (Silver with Red OK-Select Button)
5. Do you have a JP1 cable? No
6. Still have original remote? Yes (N2QAYB000862)
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes (TV: 10650)
10. Learning remote question? N/A
11. Have you tried the JP1 Lookup Tool? Yes
I am looking for the codes for the 'Apps' + 'Home' buttons added on the new Panasonic remotes for 2013. Previosuly they included 'Internet' + 'Viera Tools', but both the names and codes have changed.
For those with 2013 remotes, the codes below will handle 95% of the buttons:
Code: Select all
Function EFC D S OBC
Return 42021 128 0 212
Menu 40741 128 0 82
Sleep 29221 128 0 15
Power 20517 128 0 61
VOL+ 03365 128 0 32
VOL- 04389 128 0 33
Mute 53029 128 0 50
Up 24357 128 0 74
Down 25381 128 0 75
Left 24101 128 0 78
Right 25125 128 0 79
TV/VIDEO 61477 128 0 5
1 44325 128 0 16
2 45349 128 0 17
3 44837 128 0 18
4 45861 128 0 19
5 44069 128 0 20
6 45093 128 0 21
7 44581 128 0 22
8 45605 128 0 23
9 11557 128 0 24
0 12581 128 0 25
Aspect 09761 128 4 222 Cycle Aspect Ratio
Discrete Input - Composite 1 61733 128 0 1
Discrete Input - Composite 2 61221 128 0 2
Discrete Input - Composite 3 62245 128 0 3
Discrete Input - PC 16165 128 0 122
Discrete Input - HDMI 1 54561 128 4 176
Discrete Input - HDMI 2 55585 128 4 177
Discrete Input - HDMI 3 55073 128 4 178
Discrete Input - Component 1 15393 128 4 124
Discrete Input - Component 2 16417 128 4 125
Discrete Power On 20005 128 0 62
CH+ 52261 128 0 52
CH- 53285 128 0 53
Self Check 18981 128 0 255 THIS WILL RESET YOUR TV!
Discrete Power Off 21029 128 0 63
Recall 20773 128 0 57 Info/Display
Color Button - Red 48421 128 0 112
Color Button - Green 49445 128 0 113
Color Button - Yellow 48933 128 0 114
Color Button - Blue 49957 128 0 115
Exit 43813 128 0 211
SDHC Reader 39719 128 9 171
Select 24869 128 0 73
SAP 54053 128 0 51
Viera Link 55591 128 9 177
Viera Cast 47911 128 9 147
Viera Tools 35365 128 0 239
Sub Menu 06695 128 9 167
Favorite 38439 128 9 174 Favorite Channel
PROG- 42277 128 0 208 Sub-Channel Dash
R-TUNE 53797 128 0 55 Last Channel
Picture Menu 60965 128 0 6
Sound Menu 41253 128 0 81
Sound Select 61989 128 0 7
Brightness Up 56357 128 0 68
Brightness Down 57381 128 0 69
Contrast Up 57125 128 0 66
Contrast Dn 58149 128 0 67
Picture Select 40229 128 0 80
Tuning 31781 128 0 108
And using Remote Master, I was able to solve the codes for the other new buttons added in 2013, such as:
Code: Select all
3D 55847 162 144 5 183 12 E2
Vierra Link 55591 161 144 5 177 72 E2
Netflix 50983 143 144 5 242 B0 E2
Media Player 39719 099 144 5 171 2A E2
A couple of RDMU files helped:
Panasonic TH-xxPZ77U & TH-xxPZ700U
http://www.hifi-remote.com/forums/dload ... le_id=5083
Panasonic TC-PS60
http://www.hifi-remote.com/forums/dload ... e_id=11939
But I still cannot find the codes for 'Apps' and 'Home' ???
Any help would be appreciated. -Thank You
Posted: Wed Feb 12, 2014 1:04 pm
by vickyg2003
Apps Panasonic 128.9 OBC 143
SysIntegration provided this information at remotecentral, I've asked if he has the Home button as well
Posted: Fri Feb 14, 2014 6:19 am
by vickyg2003
Again SysIntegration came through over at remotecentral
Home = 128.9 OBC 149
Could you give us confirmation that these EFC's work so I can give confirmation back to the person that helped me with these over at remotecentral.
Home EFC 47143
Apps EFC 31271
work with TV code 0650
Posted: Fri Feb 14, 2014 8:00 am
by vickyg2003
Also we have a
Internet code that might be
Panasonic 128.9 OBC 147
That would be EFC 47911 with the TV/0650 that uses the Panasonic Mix Combo.
Posted: Fri Feb 14, 2014 9:21 am
by vickyg2003
Posted: Fri Feb 14, 2014 11:38 am
by hashtag
Very much appreciated. I will give them a try when I get home.
Thanks again.
Posted: Fri Feb 14, 2014 8:13 pm
by SysIntegration
vickyg2003 wrote:Also we have a
Internet code that might be
Panasonic 128.9 OBC 147
That would be EFC 47911 with the TV/0650 that uses the Panasonic Mix Combo.
I am doing a remote to remote learn for that Internet Button. It seems like from the original post, that that might be Pana's old version previous to "Apps." I would like to know why the code doesn't look right or full. I learned it from two different code bases. I guess I can dig deeper into the line if the code is really needed.
Posted: Fri Feb 14, 2014 9:23 pm
by vickyg2003
After looking at the internet button very closely it probably is a good learn that just doesn't conform to the Panasonic protocol for the final 8 bits.
I was expecting it to be Panasonic like all the others.
Posted: Sat Feb 15, 2014 1:48 pm
by hashtag
I tested the codes and both work perfectly !!!
Thanks again...
Posted: Sat Feb 15, 2014 3:18 pm
by vickyg2003
Thanks for getting back to us.
Posted: Tue Feb 25, 2014 6:55 pm
by SysIntegration
Not sure if this would help, but I had access to this OEM remote today and was able to get a full code set learned into my pronto, including transport commands.
Edit: just realized I didn't learn navigation, but I think I have them in another file.
Posted: Tue Feb 25, 2014 9:06 pm
by vickyg2003
At this point we have an upgrade from this list that has all the functions from this thread, except that "internet" learn you posted over at remotecentral. That is a different protocol than the rest of the signals, so that one is not covered by this upgrade.
http://www.hifi-remote.com/forums/dload ... e_id=12341
Once we have an upgrade we can load it into any of our remotes. We can also generate the pronto hex, lirc files, even wav files for non-jp1 people.
What would help is if we had that "Internet" learn posted over here.
Posted: Tue Feb 25, 2014 11:09 pm
by SysIntegration
I went through a few of my db to try and find that Pana "Internet" code again. I shot it from about 4 different remotes and even used a different prog this time. I keep getting this slight variation of code different from the one posted on RC. (I wonder if my sender took a bad firm update). I am starting to think this a bogus code, as IRScrutinzer can't even decide its protocol. Don't get your hopes up.
0000 0070 0096 0000 0085 0042 0011 000f 0011 0031 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 000f 0011 0031 0011 000f 0011 000f 0011 000f 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0031 0011 0031 0011 000f 0011 000f 0011 0031 0011 0010 0011 0010 0011 0010 0011 0010 0011 0031 0011 0031 0011 000f 0011 000f 0011 0031 0011 000f 0011 000f 0011 0031 0011 0010 0011 0031 0011 0010 0011 0031 0011 0031 0011 000f 0011 000f 0011 0031 0011 0b5f 0085 0042 0011 0010 0011 0031 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0031 0011 0010 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 0010 0011 0010 0011 0031 0011 0031 0011 0010 0011 0010 0011 0031 0011 000f 0011 000f 0011 000f 0011 000f 0011 0031 0011 0031 0011 0010 0011 0010 0011 0031 0011 000f 0011 000f 0011 0031 0011 000f 0011 0031 0011 0010 0011 0031 0011 0031 0011 0010 0011 0010 0011 0031 0011 0b5f 0085 0042 0011 0010 0011 0031 0011 0010 0011 0010 0011 0010 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 000f 0011 0010 0011 0031 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 000f 0011 000f 0011 000f 0011 000f 0011 0031 0011 0031 0011 0010 0011 0010 0011 0031 0011 0010 0011 0010 0011 0010 0011 000f 0011 0031 0011 0031 0011 0010 0011 0010 0011 0031 0011 0010 0011 0010 0011 0031 0011 000f 0011 0031 0011 000f 0011 0031 0011 0031 0011 0010 0011 0010 0011 0031 0011 0042
This is different from the code posted here:
http://www.remotecentral.com/cgi-bin/mb ... d.cgi?7156
Posted: Wed Feb 26, 2014 12:27 am
by 3FG
The two Pronto Hex decode the same. The checksum byte is off by 1, assuming that this is actually a Panasonic signal.
It is either Panasonic 128.9, OBC 147, or 128.9, OBC 19, depending on whether the checksum or the OBC is wrong. I assume that 128.9 is correct.
Posted: Wed Feb 26, 2014 10:16 pm
by SysIntegration
3FG wrote:The two Pronto Hex decode the same. The checksum byte is off by 1, assuming that this is actually a Panasonic signal.
It is either Panasonic 128.9, OBC 147, or 128.9, OBC 19, depending on whether the checksum or the OBC is wrong. I assume that 128.9 is correct.
Well 3FG, I guess this proves that this is still way over my head.
I tried to study the code and I tried to use the tools, but I still got something wrong.
Even when I use IRS, and I post the second code from above, it tells me it's protocol =?? Kaseikyo 2.32 d=8 sd=9 obj=154 misc=g-147.
That's why I was thinking it wasn't a valid code, as the hex from RC at least said it was a Panasonic protocol. Does Pana normally use toggle bits? Is that why IRS got confused? I know I am confused.