View previous topic :: View next topic |
Author |
Message |
neals
Joined: 12 Jun 2005 Posts: 54
|
Posted: Wed Jan 22, 2014 5:02 pm Post subject: JP1 interface not working on Win7 with Port Replicator... |
|
|
Hi all, its been awhile since I've visited here so please excuse the "dumbness factor". I have a JP1 8910 remote that I've used since 2006 without a hitch. I used to be able to program the remote with IR using Windows XP. The JP1 cable I have is the simple parallel one. I recently upgraded to a newer laptop and Win7. Since doing this I can't communicate to the remote with the cable connected to the parallel port of the replicator. In looking over the site and google seems it might be driver related but I cant find anything specific for the replicator. The error I'm getting is "failed to open JP1.x interface" after selecting Interface>Check interface.
Remote 8910
OS Win7
JP1 cable simple parallel
additional info: IR version 8.03
Under "Interface" JP1 Serial or USB Serial is selected and I can't select any other types. The rest above are grayed out. I also tried to select "auto detect" but IR doesn't allow it. Keeps jumping back to JP1.x radio button.
If anyone can shed some light I'd really appreciate it.
Thanks in advance. |
|
Back to top |
|
|
neals
Joined: 12 Jun 2005 Posts: 54
|
Posted: Wed Jan 22, 2014 5:42 pm Post subject: |
|
|
Hi all, please disregard. I was able to get this going again by running IR as admin.
Thanks. |
|
Back to top |
|
|
|