JP1 Remotes

got a pro-hd box, and today my friend gave me an ECHOLITE HDC-2210
and i like to connect it to the box
somebody can help me with a bin file for it?

or it can be work with the old Echolite CDVB-5668 binfile?

thanx a lot

Why haven't you tried it ?

I could not find the HDC-2210, but the Logitech database offered the DSB-790 as a possible. That uses the same codes as the Erastar ER-300. There is a Custom Remote for that box at https://www.hifi-remote.com/forums/dload ... le_id=8110

Any good ?

Hi Alan!

i tried that old one, and it's not working
wrong codes, for a channel up the box is swiching to radio

thx for that link i'll try that erastar codes now

i'll response when i done

so, i tried that erastar pl bin file

not working "correctly"

i tried all over the active buttons on the remote
all other buttons which aren't in this list are inactive

the results:

power -> digit 6

pause -> do nothing

guide -> channel down

menu -> digit 1

info -> digit 4

cursor right -> favorite

cursor down -> switching to radio & back to TV

cursor left -> do nothing

cursor up -> last

channel down -> switching to radio & back to TV

channel up -> last

ok -> exit

exit -> digit 7

red -> aspect ratio

green -> digit 3

yellow -> do nothing

blue -> do nothing

digit 1 -> digit 2
digit 2 -> digit 5
digit 3 -> digit 8
digit 4 -> digit 0
digit 5 -> volume mute
digit 6 -> volume up
digit 7 -> volume down
digit 8 -> ? black screen without sound, no other message - pushing again video&sound coming back
digit 9 -> not found any usb device
last -> subtitle setting
digit 0 -> main menu

OK, that's a good start.

Do the same test with the BIN file I just posted at https://www.hifi-remote.com/forums/dload ... e_id=12279

Make sure you test EVERY button, including the 15 Custom Remote buttons you get when you right-click on the image and select Custom.

Once I have those results we should be close.

the C2011_PL.bin results:

digit 1 -> aspect ratio
digit 2 -> channel list? maybe "ok"
digit 3 -> not found usb device
digit 4 -> maybe "info"
digit 5 -> channel up
digit 6 -> pause
digit 7 -> audio settings
digit 8 -> ? black screen without sound, no other message - pushing again video&sound coming back
digit 9 -> digit 4
digit 0 -> EPG
enter -> digit 9
custom 18 -> subtitle settings

that's all, others are not working, looks like do nothing

That's a bit disappointing, we are missing quite a few I would have expected to find. Maybe we might get better results using the Echolite CDVB-5668 ?

Can you do the same test using that remote ?

of course...
i just need to reset the settopbox
after the last testing something went wrong
and i've got only black screen with |noise| sound only
and no any menu or other else coming up
so, i must wait for my friend to get home and reset the echolite (and/or the slingbox)

when i done, i'll reply again

so, it's powered off
one of the buttons just switched off
dont know which one
its up again, so im starting the test

power -> digit 7
guide -> nothing
menu -> info
info -> nothing
cursor up -> nothing
cursor right -> digit 1
cursor down -> favorite
cursor left -> pause
ok -> channel list
channel up -> power off?
channel down -> digit 8
page up -> channel down
page down -> digit 6
red,green,blue,yellow -> noting
digit 1 -> digit 3
digit 2 -> schedule
digit 3-> exit
digit 4 -> channel up
digit 5 -> usb device
digit 6 -> nothing
digit 7-> digit 2
digit 8 -> mute
digit 9 -> volume down
digit 0 -> digit 5
last -> switch to radio?
enter -> digit 9
custom 10 -> volume up
custom 11 -> audio settings
custom 12 -> aspect ratio

that's all
with the S2013PL.bin from the Echolite CDVB-5668

OK. I am slightly concerned that during all these tests you have never found a code for the Up/Down/Left/Right arrows. I hope you are putting the device into an appropriate screen (Menu, Guide..) where these keys would be recognised ?

Next test file at https://www.hifi-remote.com/forums/dload ... e_id=12280

as i remember i tried the "nothing" buttons over in the "menus" fro up/down/left/right
after this test, i'll try again all other files before for the cursors

now the last results for s2011pl:

power -> last
play -> nothing
rewind-> nothing
stop-> nothing
ffwd-> nothing
skip backw-> nothing
pause-> nothing
skip ffwd-> nothing
rec-> nothing
guide-> nothing
menu-> nothing
info-> nothing
cursor up-> nothing
cursor down-> nothing
cursor right-> nothing
cursor left-> nothing
ok-> nothing
channel up-> nothing
channel down-> nothing
exit-> nothing
page up-> nothing
page down-> nothing
red-> nothing
green-> nothing
yellow-> nothing
blue-> nothing
grey-> nothing
digit 1 -> epg
digit 2 -> aspect
digit 3 -> green or left?
digit 4 -> menu
digit 5 -> digit 0
digit 6 -> digit 4
digit 7 -> nothing
digit 8 -> nothing
digit 9 -> nothing
digit 0 -> noting
last -> nothing
enter -> noting
custom 11 -> noting
custom 12 -> noting
custom 13 -> noting
custom 14 -> noting
custom 15 -> noting
custom 16 -> noting
custom 17 -> subtitle
custom 18 -> nothing
custom 19 -> nothing
custom 20 -> noting
custom 21 -> nothing
custom 27 -> nothing
custom 28 -> noting
custom 29 -> digit 9


thats all,
i tried all over the buttons, can't found the cursor buttons

I'm beginning to get the impression we are getting random results here. So we may be wasting our time.

OR, maybe the arrow buttons are combined with the CH+/- and Vol+/- codes ? What happens in a Menu/Guide if you use the Ch+/- buttons ?

https://www.hifi-remote.com/forums/dload ... e_id=12279 is the next set of codes. There are 255 possible one. The first 2011 took us to Code 80, this one takes us to Cod 120.

Meanwhile, https://www.hifi-remote.com/forums/dload ... e_id=12280 is what we have so far, so might be usable.

now, i re-tested all 3 earlier bin files , no luck:

erastar S2010_PL.bin - not found cursors

C2011_PL.bin - not found cursors

S2013_PL.bin - not found cursors

yes!
You right
i tested again the S2013_PL.bin files with the channel menu:



page up - channel down - in the channel list menu -> cursor down
digit 4 - channel up - in the channel listmenu -> cursor up
digit 9 - volume down - in the chanel list menu -> page down
custom 10 -> volume up - in the channel list menu -> page up


now im testing Your last file
the C2010_PL/bin (12280)