JP1 Remotes

Hi,

I need a .bin file for Kaonmedia STB NS1110, for OTETV in Greece. I tried all Kaon bin's from your site with my Slingbox Solo, and none is working.

I found the following information elsewhere, it might help :

FileFormat=PRCTOOL
Remote control descripe=:
keymap=universal
Device=KAON
Brand=Learned
Model=OTETV

Button's counts=30
0,D00=0051 48 24 FF
2,EXIT=0051 48 24 28
3,MENU=0051 48 24 77
6,1=0051 48 24 C7
7,2=0051 48 24 47
8,3=0051 48 24 87
10,4=0051 48 24 FD
11,5=0051 48 24 7D
12,6=0051 48 24 BD
14,7=0051 48 24 DD
15,8=0051 48 24 5D
16,9=0051 48 24 9D
18,D18=0051 48 24 F7
19,0=0051 48 24 1D
20,D20=0051 48 24 EF
22,D22=0051 48 24 B7
23,D23=0051 48 24 D7
24,OK=0051 48 24 57
25,D25=0051 48 24 97
26,D26=0051 48 24 37
27,VOL+=0051 48 24 9F
28,VOL-=0051 48 24 1F
29,CH-=0051 48 24 3F
30,CH+=0051 48 24 BF
9,MUTE=0051 48 24 DF
13,D13=0051 48 24 C5
39,D39=0051 48 24 E7
40,D40=0051 48 24 67
41,D41=0051 48 24 A7
42,D42=0051 48 24 27

Chris

Alan, this appears to be some short hand for a Nec1 72.36
The RDMU for the
Kaon KTSF-B3202NSO appears to be a match for the codes here
https://www.hifi-remote.com/forums/dload ... e_id=11164

However when I imported the Bin for the KTSF-B3202ns0 the code isn't coming up right.

Vicky

OK, Vicky is correct, the NS110 appears to be the same box as the KTSF-B3202NSO. So that Custom Remote should have worked, and with 280 successful downloads I guess it is OK.

Vicky: I just tried importing the BIN from https://www.hifi-remote.com/forums/dload ... e_id=11145 and had no problem.

achris: The instructions categorically state "..If you have problems please do NOT just report back it 'doesn't work', that is totally useless for someone trying to understand what is going on. So please report the following:..."

I guess you didn't read them properly ?

There are a newer set of instructions at http://placeshiftingenthusiasts.com/for ... -350500-1/

Care to try again ?

alanrichey wrote: Vicky: I just tried importing the BIN from https://www.hifi-remote.com/forums/dload ... e_id=11145 and had no problem.

Alan, you are right, my extract process had a dialog message that I missed. Apparently I have some process somewhere holding on to an old bin preventing the copy. Guess its time for a reboot.

Dear Alan,

I must have done some mistake previously.
It is working fine now.

Thanks a lot !

Chris

Good, glad it's sorted