JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Need EFC for Enter/Select/OK on oCosmo CE4001 (Sony Code)

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Code Search
View previous topic :: View next topic  
Author Message
mestizo122



Joined: 30 Dec 2013
Posts: 2

PostPosted: Mon Dec 30, 2013 7:39 pm    Post subject: Need EFC for Enter/Select/OK on oCosmo CE4001 (Sony Code) Reply with quote

1. Device: oCosmo CE4001
2. Type of device: Television
3. Year: 2013
4. JP1/UEI Remote model: Comcast (Gray with Red Select Button)
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes (but really getting lost)
8. Checked Pronto file section (at R/C)? Yes (but got lost)
9. Partially working setup code? 11100 and 11317 (had to reprogram power button to toggle) - Sony Codes
10. Learning remote question? No
11. Have you tried the JP1 Lookup Tool? Yes, tried codes 00174 and 14149 to no avail.

TV Link - (http://www.amazon.com/oCOSMO-CE4001-40-inch-1080p-Glossy/dp/B00AEP8TG8)

Trying to program a remote from a Comcast (Xfinity) cable box. It is the silver with red OK button. In the battery compartment there are some pins which I am assuming are the JP1.

I have looked around, trying to figure out this EFC things, and don't have a great understanding of it, but understood enough to program my Vizio Soundbar to the controller, and lock the volume control to leverage Aux instead of TV.

I have originally used the setup code 11100 which allowed Power, volume (before locking to AUX), the arrows, and the Input (TV/VCR) button to work. For me to select the input with the original controller I have hit the Enter/Select/OK button, but that does not work with the Comcast/Xfinity remote.

I then found another Setup Code that was 11317. For me to use this code I had to reprogram the power button so it toggles, but the input button and arrows still work. Still no Enter/Select/Ok button.

I have tried a few different EFCs: 00174, 00140, 14149.

The process I used to change the mapping:
Press TV (1 blink)
Press and hold Setup (2 blinks)
Type 9 9 4 (2 blinks)
Press Setup
Type one of the above EFCs
Press OK button (2 blinks)

Am I doing this wrong, is there a better EFC to use?
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3220

PostPosted: Mon Dec 30, 2013 8:34 pm    Post subject: Reply with quote

I'm sure that you're doing the keymove procedure correctly, since you're able to program the power toggle on 11317. This could be like looking for a needle in a haystack, but here are two EFC suggestions, both for use with 11317:

12101 (standard Sony device 1, OBC 101, but sent using Sony15 instead of Sony 12 IR protocol)
53292 (Device 151, OBC 74-- seen on some Sony models)
Back to top
View user's profile Send private message
mestizo122



Joined: 30 Dec 2013
Posts: 2

PostPosted: Mon Dec 30, 2013 8:57 pm    Post subject: Reply with quote

Thanks for the help, unfortunately that is a no go.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Code Search All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central